Cable Entry Seal

This is a 30mm long bushing (meant to be printed in TPU or flexible filament). The center diameter is 5mm and the outside diameter is 24mm. This is a perfect solution to plug the large holes required for Amcrest, Dahua, Hikvision, Uniview, and other camera manufacturers which use a water resistant cable cover assembly.

Drill your hole, insert everything, then feed this bushing onto the cable and stuff it into the hole. The bushing is slightly larger than a 7/8" drill hole (the size required to fit a cable head cover). As you fit it into the hole, it will squeeze the cable as well and seal up.