This model is restricted by licensing terms.
View license.
3 Likes18 DownloadsMay 10, 2024
This model is restricted by licensing terms.
View license.
Introducing a 3D-printed soap dish designed for customization and functionality. It's a two-part design with a lower part to collect water and an upper part that holds the soap.
Design Features:
- The soap dish measures 130mm by 90mm.
- The upper part comes in several variations: a smooth one with four vertical holes, one filled with hexagonal holes, and a solid one designed to be printed with infill only.
- The infill-only version should be printed with 0 top and bottom shells, around 40% infill, and 0.6mm infill layer width.
- The upper part is available in two heights: 2mm and 4mm.
Printing Tips:
- No supports are needed for any of the parts.
- If you encounter first-layer adhesion issues, consider using a brim.
This soap dish design offers a variety of customization options, and I'm excited to see your remixes and how you make it your own.
Categories:
3 Likes18 DownloadsMay 10, 2024
This model is restricted by licensing terms.
View license.
3 Likes18 DownloadsMay 10, 2024
This model is restricted by licensing terms.
View license.