You can pour the water directly onto the plate, from which it flows into the pot, or if you pour into the pot, the excess water will drain onto the plate.

Note that due to the overlap of the ribs, when pouring water on a plate, be careful not to flood the water. Pour into several grooves a bit like swiping horizontally. If you want, you can scale the pot like 1 or 2 % smaller to create a better water flow to the plate.

Size 180x180x150 mm - pot and plate together

7 x 7 x 5,9 inches

Scalable down and up!

My own 120x120x120 growing pot fits inside this. If you use a growing pot inside, make sure the size of the model before printing. The bottom is moderately narrow. Scale if needed.

It takes time to print all the features, but this is quite easy to print, so you can increase the print speed if the print time feels long.

Hope you like this one! Happy printing!