Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4762952.

I wanted more dryboxes for my regular rotation of colors and the Rubbermaid containers are really hard to find and quite expensive now. I found some great containers on Amazon and designed a platform in Tinkercad to hold a TUSH roller centered and stable while also being adjustable.

Print Settings:
Layer Height 0.20 - 0.28mm (did mine with 0.28)
***3 walls minimum***
CHEP Rough Profile works fine as long as you set wall count to 3 or more
Infill 15-20%
Supports may be needed for the TUSH-Brace pieces for the M3 nut cutout depending on your printer's bridge performance.

Instructions:
Print (4x "TUSH-3mm Wall") -OR- (2x "TUSH-3mm Wall" and 2x "TUSH-1mm Wall") for a little more room for wider spools - tested with 68mm wide Overture spool. 
Print 1x "WildoneDryboxPlatform"
Print 2x "TUSH-Brace"
Print 1x "TUSHStablizerRod"


You will need:

At least 1: Wildone Airtight Cereal Storage Container 4L/135.3 Oz - https://www.amazon.ca/dp/B07L2QJ5LB/ref=cm_sw_r_cp_apa_i_C9RV7M231F2JW1GS21EA

https://www.amazon.ca/dp/B07K3TPQ86/ref=cm_sw_r_cp_apa_i_TXQ42DHYDCAHRSQYFH4K

Edit: These appear to be the same container design available from the US site -> https://www.amazon.com/dp/B08PZBL1KD/ref=cm_sw_r_cp_awdb_imm_t1_4NNF1XFGCS602WSHSKKQ?psc=1

4x 608 bearings
2x M3*8 Machine Screws
2x M3 nuts

For the TUSH-Brace file - I used https://www.thingiverse.com/thing:2781034 as a source for the M3 nut cutout. Thingiverse gave me an error when I tried to credit multiple things.

For the Silica Canister I used - https://www.thingiverse.com/thing:2070351


Filament Drybox for Wildone Food Storage Container 4L

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4802109.

I wanted to add some color to my screen housing so I made this in Tinkercad. You can simply drop it in place or do what I did and use a couple thin strings of blue sticky tack along the bottom of the flat outer frame. I purposely designed it to have a slight bit of wiggle room (<0.2mm) so you should not have to make any post-print adjustments. 

Ender 3 V2 Screen Frame

LACK Enclosure Filament Passthrough with PC4-M10 Coupler

LACK Enclosuire Filament Passthrough with PC4-M10 Coupler

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4803079.

Small base for Raspberry Pi Camera thing 3114849

Small Base for Pi Cam Mount 3114849

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4802796.

I wanted to use this BLTouch cover for thing 4637453 but had to make some adjustments due to the BLTouch Cable being on the outer side. I also added little clips so there is no need to worry about the print weakening over time and falling off. 

BLTouch Cover for Thing 4637453

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4799854.

A simple remix of my favorite drawer replacement option for the Ender 3 V2. I wanted a drawer again but didn't want to change the location of my Pi. I loaded the drawer shell into Tinkercad and removed the lower drawer and adjusted the shape of the rail inserts. I used a couple dots of hot glue to attach the back of the shell to the frame.

The faceplate, knobs, and all drawer inserts can be found in the original thing file @ https://www.thingiverse.com/thing:4622648

Shoutout to Kediil for the awesome drawer design!

Ender 3 V2 Dual Drawer Tool Holder - Top Drawer Only

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5374547.

Sleeve/case for Uwell Caliburn AK2
***UPDATED AUGUST 1 2022***
V2 Model adjusted tolerance for easier fit.
Print outer before inner walls for best surface quality

Uwell Caliburn AK2 Case

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

rf1989

Achievements

Seedling

Trailblazer