Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4225886.
Update: I plan on doing some revisions here to add a newer controller and firmware to eliminate the teensy 2.0 and the phantom pcb, since they are either out of production or nearly impossible to find. It will most likely be a handwired version utilizing the metal plate. If you want a fully printable handwired version there is also: The2187Lite - A Handwired 65% revision of The2187 TKL with OLED and RGB!
As promised, this is another case for the modular system i described in: https://www.thingiverse.com/thing:4221440
This one is a more modern design, maybe with a little dash of cyberpunk, that's also a little more compact. The2187 is the pretend future redesign of The1987, assuming some industrious designer in the future looked back and wanted to capitalize on the popularity of the original.
The instructions and parts lists for The1987 all apply to this case.
Enjoy!
Update 1: I fixed the screw hole depth on the bottom halves so 8x M12x12mm screws will work better, Also if you have only M4x16mm - print 8 of the screw inserts and they can now be used as well
My other stuff (mostly Keyboards) https://www.thingiverse.com/revere521/designs