Replacement beam for an old wooden rail gate.
Printed topdown without supports with 100% infill
The tip was a bit too tight so I used a Dremel to sand it down slightly.
Used onshape, you can find the original file here https://cad.onshape.com/documents/e87e00af0c496e3dd16fcf01/w/c5a154e7b186ac4bbe5c57a7/e/dde496a123693ff53ff84475
Categories:
3 Likes4 DownloadsFebruary 5, 2024
3 Likes4 DownloadsFebruary 5, 2024