The original shape of the Goggle X is flat and pushes hard against my nose. This adds extra curve too the face plate for people with more rounder faces. These attach with velcro to the original goggle faceplate and you can stick pretty much any goggle foam to it if your willing to cut the nose area a bit.
**Print recommendations:**
 I recommend printing this out of TPU with 2 walls and 10% infill for the added squishiness and black to  block out light. You will need supports and I recommend having the side facing your face down as this proved to give slightly better results. 

Walksnail Avatar Goggles X Faceplate

Walksnail Avatar Goggles X Faceplate.stl

These are landing skid pads for the Armattan Tadpole. The are mounted with the motor screws and protect them from getting scratched on landings. You will need motor screws about 1mm longer than normal to account for the thickness that the skids provide. I recommend printing them out of PLA or some other hard plastic.

Arrmatan tadpole motor skids

These are mounts for the Runcam Thumb to mount onto the Armattan Tadpole 3" and 2.5". This mount pushes the camera forward to allow for a 450mah battery to fit better. It is recommended to print them out of TPU and on it's side and use supports. Adjust the rest of the settings to change how soft or hard the camera is mounted. 

Runcam thumb mount 27 degrees.stl

Runcam thumb mounts form Armattan Tadpole

katana progect v13.step

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

rainbowgeb

Achievements

Seedling

Debutant

Walksnail Avatar Goggles X Faceplate

Arrmatan tadpole motor skids

Runcam thumb mount 27 degrees.stl

Runcam thumb mounts form Armattan Tadpole

katana progect v13.step