support parasol.stl
24 downloads · 3 years ago · This part was designed to hang an umbrella outside a wooden gallery ramp. You need 2 supports.
I'v
This part was designed to hang an umbrella outside a wooden gallery ramp. You need 2 supports.
I've tested it with PLA+ and everything is good even though it is on full sun and printed in black PLA+ (2 years without problem on south orientation at full sun). My suggestion would be lighter color Here are my printing parameter: PLA+ eSun 0.6mm nozzle 4 walls 15% Gyroid infill 6 top and bottom layers
support parasol.stl
24 downloads · 3 years ago in and
Gridfinity Baseplates
Gridfinity Divider Bins
8x8 MU - Center Grid Interfitted - MultiBoard Octagon Plate
6.25 mm - Quad Offset Snaps (DS Part A)
6.25 mm - Offset Snap (DS Part A)
6.25 mm - Dual Offset Snaps (DS Part A)
Raised Dual Snap (DS Part B)
Raised Quad Snap (DS Part B)
Raised Double-Sided Snap (DS Part B)
Collapsing Drill Sword Print-in-Place
Collapsing Katana
9x9 MU - Center Grid Interfitted - MultiBoard Octagon Plate
Raised Multiboard Snap
Offset Snaps Removal Tool
.jpg&w=3840&q=75)
Multiboard Demo Pack (FREE)
8x8 Multiboard Corner Legacy Tile
Star Wars B1 Battle Droid 2.0 Kit Card
Ironing Stack - Test Print - Key Chain
8x8 Multiboard Side Legacy Tile
%2520in%2520aciton%25202.png&w=3840&q=75)