Idler for ethirteen LG1+.
Broke my whole lower chain guide on my DH, could find the [roller cage](https://www.printables.com/fr/model/169642) but not the idler.
Use with a simple 5x20 mm nut (no bearing as i don't use the chain that much, just grease well), and 0-2 washers to account for your printer's tolerances. If you need a version with a bearing or some other change, just remix or request it.


e*thirteen LG1+ lower idler

LG1 lower idler.stl

Basic keychain to stick a label on, or to write directly on if printed in a bright color.

basic label keychain

Magic The Gathering deck box that can be infinitely connected, to be more rigid than several individual decks in a backpack for example.
Can be chained, and two chains can be stacked with the connector.
Suitable for decks of ~90 unsleeved cards.
Might design a shorter case for dice or tokens later.

Connected deck box (MTG)

couvercle magic.stl

connecteur magic.stl

Mouse shell to accomodate for the motherboard of an ultra cheap bluetooth mouse I got from Aliexpress that came broken. 
Still kind of a work in progress, as it can be perfected (I might refine it) but it works fine.
Bottom made out of PETG, top is basic white PLA.
The pairing/DPI button is under the shell, I did not go into the trouble of making a dedicated button as it's a function I use once a year and it looks better as is. The battery has no cover for now, I might design and upload a cover later; this is by no means a problem, as the battery is firmly pinched with the force of a thousand gods.

square cheap mouse

souris v11.stl

Spool holder using a 30 mm PVC pipe, fits with wood screws in the predrilled holes.

Ikea Albert spool holder

Use on a wall with double sided tape or Patafix.

Decorative rope wall holder

Simple thing you poke at the end of an enamel pin to prevent it from falling.
Available in 1mm or 1,2mm pin hole. Hole depth: 6mm. 
Tested in TPU, might not work with hard materials.

Pin fastener and holder

attache pin 1,2mm.stl

Headband part designed to replace mine that cracked. It has some flaws but it seems to work. Made the place that cracked on mine a little thicker to be sure.
Print it with strong filament, works for me with PETG.
Athough I made a hole for the little metal bracket, it's not needed as there is enough friction to prevent the headband from sliding accidentally.

Skullcandy Venue hinge or headband

Headband part designed to replace mine that cracked. It has some flaws but it seems to work.
Print it with strong filament, works with PETG.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

publicite.jeux.simon

Achievements

Seedling

Explorer

Debutant