Chainmail Armor - Create your own super light chainmail

Create your own super light chain mail with 3d printing. (The images are real!!!)

Turn your 3D printer into a medieval forge with this groundbreaking, multi-layer chainmail model, meticulously designed to maximize space while offering unparalleled fidelity. The result is a life-sized chainmail sheet larger than your printer's build plate.

Whit this files you can print large pieces of chainmail and assemble a whole shirt very quickly.

The files included enable you to print and assemble your own full chainmail shirt, boasting a remarkable level of detail and durability.

Package Includes:

• Front left chainmail piece (200x235) — 60 hours
• Front right chainmail piece (200x235) — 60 hours
• Back chainmail piece (200x235 - print twice) — 62 hours per piece
• Sleeve chainmail piece (210x220 print twice) — 38 hours per piece
• Calibration test file for print optimization
• Invividual ring file for assembly and repair.

Additional Files (Variants and for small printers on attachments)

• Sleeve Short Version (210x105)
• Right Short Version (200x215)
• Left Short Version (200x215)
• Back Short Version (200x215)

Total Printing Time: 313 hours Note: All print times are based on the Prusa i3mk3s.

Design of the Week on Fabbaloo By Kerry Stevenson on October 24th, 2022 in Design (https://www.fabbaloo.com/news/design-of-the-week-3d-printed-chainmail)

VERY IMPORTANT It is imperative that both the general layer height and the first layer height are set to 0.3mm. The model is meticulously designed with this specific layer height in mind to ensure optimal adhesion among the rings and to the platform. Deviating from this set layer height could adversely affect the print's integrity, risking failure.

Key Specifications:

• Critical Adhesion: Good adherence to the build plate is crucial for preventing warping and deformations that may ruin ring geometry, leading to assembly or wear issues.
• No Supports Needed: The model includes built-in supports where necessary.
• Adhesion Platform: A specialized platform enhances ring-to-bed adhesion, preventing print failures.
• Leveling Aid: The adhesion platform doubles as a leveling assistant.
• Optimized Layer Heights: Designed for a 0.3mm layer height for optimal adhesion between rings.
• Nozzle Versatility: Compatible with 0.4mm and 0.8mm nozzles. Stringing: Fine-tuned retraction settings reduce stringing for perfect ring formation.
• Slice Time: Complex polygonal design requires patience in slicing; latest version of PrusaSlicer recommended.

Additional Information Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.