Every segment of the whip, including its elegant tassels, is interconnected, allowing for seamless printing without the need for assembly
Printing Settings
Filament Material: PLA
Layer Resolution: 0.2 mm
Infill Percentage: 15%
Supports: No
Brim: No
Bed Temperature: 60°C
Nozzle Temperature: 210°C
Printing Information
Nozzle Size: 0.4mm
Estimated Printing Time: Approximately 14 hours 39 minutes
Print Volume: 201mm (width) x 201mm (depth) x 190mm (height)
Printer Used: Prusa i3 MK3S
Slicing Software Used: PrusaSlicer
Additional Information
Ensure your printer is well-calibrated and the bed is leveled for optimal results. Maintain bed adhesion by keeping the bed clean and free of grease. Use isopropyl alcohol for cleaning and apply adhesive if necessary.
