How long can you keep the it going? A fast-paced skill game of knocking the ball back and forth. Requires good concentration and hand-eye coordination. Snap fit assembly with no gluing required.
Complete package with 3D printing instructions & detailed game playing rules.
Also available on Patreon: https://www.patreon.com/PrintableGames
Files Included:
Main Board Part 1.stl (print 1 of this) Main Board Part 2.stl (print 1 of this) Center Connection A.stl (print 1 of this) Center Connection B.stl (print 1 of this) Ball Axis.stl (print 1 of this) Paddle.stl (print 2 of this) Handle.stl (print 4 of this) Screw.stl (print 4 of this) Connector.stl (print 6 of this) End Cap.stl (print 2 of this)
As always, feel free to make things more interesting by printing different pieces in different colors or if you’re feeling even more adventurous try experimenting with different sizing and scaling :)
Tips & Settings:
No special printing requirements or supports needed.
Print the Ball Axis.stl with a brim to avoid it collapsing during print as it is tall and narrow. To do this, in Bambu Studio, click on the “Others” Tab, and in the “Bed Adhesion” Section Choose: Brim Type > Outer Brim Only.
Parts need to be assembled according to the illustrations included in the Instructions PDF file.
No gluing necessary, all parts snap fit together and/or connect using the included screw file.