Make up mirror with lights

Front.stl

Overkill Ikea Lack brace

From my overkill series, some stabilising braces for your Ikea Lack table.

They reduce wobbling, thus reducing vibrations and making your print quality better, and your printer quieter.

As with all my overkill designs, this is thick, stable and durable. It follows a “no support” ideology, so it prints with no supports and the best is to print this laying flat. Print 4 pieces. Can be printed with any material and any infill.

It fits any Lack table.

It includes to 2, 3mm holes so use any screw bigger than that and it will self tap. Holes are recessed to hide the screw head.

Overkill filament roll hanger

I designed this fully printable filament roll hanger to be strong, sturdy and to last.

It's designed with “no supports” ideology in mind, and as such prints easily with no supports,

Print the hooks laying flat for ultimate layer strenght. Pole prints standing with no supports.

Tolerances are tight, so screw and unscrew few times before using to loosen things up.

Pole and hooks have matching stoppers to stop the pole from turning.

Each side has three holes for screws, holes are 2mm in diameter, so use screws bigger than that and it will self tap.


Print set:

Hook: x2
Screw: x2
Pole: x1


Print with any material you want. Can be mounted in whatever orientation you want.

Hook.stl

Homebrew hook

For those of us who homebrew, here's a simple and very easy/quick to print hook that fits most homebrewing accessories. Including tapped 3mm countersunk screw hole, but if you print in PLA or ABS, it will tap easily for use with slightly bigger screws.

No supports, no brims, just lay it on the flat side and print away.

Scooter Stand.stl

Kids' scooters tend not to have a kick stand and often just lie around. This solves the issue. Two things are included:

1. An STL file with my vison of the design: fits scooters with 120mm wheels or bigger.
2. Fusion 360 file with a base design and a wheel (120mm currently). You can resize the wheel, and extract it from the base design (I used Tinkercad), to suit your particular scooter. You can also resize the base and decorate it however you'd like.

Printed on a Creality CR-20 Pro with 0.16mm layer height, no supports and a brim. I still got a little lift in one corner somehow, but that's my printer settings issue, not a model issue. 

Feel free to share your creations and remixes!

Sponge Holder

Holder Divider.stl

That's what I do: I drink, and I print things.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

New content from your premium memberships

Emails and messages from designers you follow

Get notified when someone purchases your models or memberships

print.hero

Achievements

Seedling

Explorer

Novice Maker

Debutant