nuclear barrel can cooler

presenting the nuclear barrel can cooler! A useful print that keeps your favorite drink nice and cold! Print all the parts, fill it with water, secure the pegs, put it in the fridge, take it out, put your fav drink and enjoy! 😊

If you would like to sell my models please consider subscribing to my Patreon at: https://www.patreon.com/pressprint

Instructions: The cooler has 2 openings at the top, one was made to pour water between the inner and outer wall, the other one is to allow the air to escape as you fill it out. Also Don't fill it to the top, because the water expands when it freezes. NOTE : this can cup is designed for 12OZ can only.

Files: The file contains two versions of the can cup, the first version printed in short time (it took 6h on my flsun super racer) but you have to tune your settings to make it 100% water tight, the second version took 9h to print with regular settings.

Printing instructions:

Settings for the Can cup V1: scaling: 100% nozzle: 0,4 layer height: 0.2 Line width: 0.6mm (even if you’re using a 0.4mm nozzle) wall line count: 2 infill: 50% to 70% Skin overlap percentage: 20% support: no

Settings for the can cup V2: scaling: 100% nozzle: 0,4 layer height: 0.2 Line width: 0.4 wall line count: 2 infill: 50% to 70% support: no

this model is licensed under_ theCreative Commons - Attribution - Non-Commercial - Share Alikelicense._

happy printing.