pocket562 followers

Taller Wavy Table Lamp

12 downloads · 1 year ago · This 3MF file includes: Taller Wavy Table Lamp **Print Settings for Lamp Base:** _* Settings are fo

Description

This 3MF file includes: Taller Wavy Table Lamp

Print Settings for Lamp Base: * Settings are for 0.8mm nozzle. You can use a regular 0.4mm nozzle with adjusted settings.

1 wall
0% infill
0.6mm layer height
1.2mm layer width
15 mm/s initial layer
20 mm/s wall speed
3.5 hour print time
approx 330g
Turn off slow down for overhangs

Print Settings for Attachments: * 0.4mm nozzle ideal

3 walls
0.2mm layer height
0.42mm layer width
5-10% infill
Print slow for best quality
15mm/s initial layer
40 mm/s wall speed

You will require superglue to join the parts together. The table lamp will have a base cap, and a top cap. No glue is required to attach the lamp shade attachments.

This lamp is designed to fit a IKEA Strala lamp cable.

Tags:

Discussions

Pinchie9 months ago

Hello again! I notice that this one is missing the "base cap, and a top cap". I tried printing the top cap from the smaller wavey base file and it's too small, I can't see any way the Palermo Lamp shade attaches to the large wavey base without the correct top cap to sit it firmly on. Perhaps it would be easier to bundle possible bases with each possible shade with the correct parts in both STL and 3mf format to avoid this confusion? Thanks, love your designs.