So I've been working in a plant shop a couple days a week. From this I have discovered that there is only way to correctly water a plant - bottom watering.

For the uninitiated, you have the Selene Pot, as well as an inner nursery pot where the plant lives. You pull up the inner pot and add about 2cm of water into the waterproof Selene Pot. The plant will pull in all the water that it needs - watering made easy.

This Selene Planter is suitable for 135mm x 140mm nursery pots - a common size.

Included:

• Selene Planter 135mm
• Plant Pot Pull Tags (designed to fit the standard pot tag slot)

Print Settings:

These settings have been optimised for efficient printing, waterproof products, and optimal filament usage. (3 per spool)

• 0.8mm nozzle ideal, although not necessary
• Layer Height: 0.6mm
• Line Width Outer Wall: 1.08mm
• Line Width Inner Wall: 1.02mm
• Line Width Top Surface: 0.82mm
• Scarf Seam: Contour and hole
• Wall Loops: 2
• Bottom Shell Layers: 4
• Surface/Infill Pattern: Concentric
• Maximum Print Speed: 35mm/s
• Top Surface Print Speed: 20mm/s

All settings are highly optimised to allow me to sell these high quality prints in my store, you can see how I market and sell these at: https://pocketpickedit.com