This 3MF file includes: Table Lamp Attachments for Bubble Lamp Attachments for Orbitier Lamp
Print Settings for Lamp Base: * Settings are for 0.8mm nozzle. You can use a regular 0.4mm nozzle with adjusted settings.
- 1 wall
- 0% infill
- 0.6mm layer height
- 1.2mm layer width
- 15 mm/s initial layer
- 20 mm/s wall speed
- 3.5 hour print time
- approx 250g
Print Settings for Attachments: * 0.4mm nozzle ideal
- 3 walls
- 0.2mm layer height
- 0.42mm layer width
- 5-10% infill
- Print slow for best quality
- 15mm/s initial layer
- 40 mm/s wall speed
You will require superglue to join the parts together. The table lamp will have a base cap, and a top cap. No glue is required to attach the lamp shade attachments.
This lamp is designed to fit a IKEA Strala lamp cable.
Please note, you can find both Orbitier and Bubble Lamp shades in the lighting membership folder.
Categories:
3 Likes0 DownloadsOctober 27, 2024