Bring the classic Inspector Gadget to life in 3D form, complete with his iconic helicopter hat that actually spins. With his trench coat, gadget-filled design, and signature copter spinning overhead, this model captures his quirky charm and crime-fighting style. Perfect for display, he’s ready to hover straight into your collection.

Dimensions:

At 100% scale, Inspector stands approximately 11 inches (280 mm) to the top of the copter and 7.08 inches (180 mm) from blade to blade. Scaling up should work well, but scaling down may tighten tolerances and make assembly more difficult.

Colors Used: Bambu Basic: Red, Black, Dark Gray, Gray, Cocoa Brown, White, Cobalt Blue Bambu Matte: Caramel (Gloves) Bambu Silk+: Silver Esun PLA+: Beige (Skin Tone)

Print Profile: To achieve the higher detail copter blade, a multicolor printer is required, but it can still be printed in a single color.

In the profile, you will find optional AMS friendly parts, including the copter, face with eyes, handles, jacket with buttons, and shoes.

Assembly Tips Attach the left and right handles to the hands and the red copter base during the final step. To identify the parts, refer to the reference images included in the package. The silver handle pieces have small cutout notches The top of the left black bend also has a notch The blue ring parts are marked with dots for identification:

1 dot = #1 2 dots = #2 3 dots = #3 4 dots = #4

The dotted side should face the black bend parts

Placement of the blue rings: #1 bottom left #2 top left #3 bottom right #4 top right

Once both handles are assembled, slide them into the hands and press them into the top of the red copter base.

Assembly Steps Attach the black soles to the gray shoes Add the black socks, then attach both shoes to the legs Attach the legs to the lower jacket Secure the belt and upper jacket using the pin Attach the belt loops and belt buckle Attach all buttons to the jacket Attach the hands to the jacket Insert the inner white shirt with tie into the jacket Assemble the face with the eyes, then attach the hair Build the hat and attach it to the head Assemble the copter parts Attach the copter blade, then the copter cap Do not press the cap down too tightly when gluing so the blades can spin freely Assemble the left and right copter handles using the instructions above lace them into the hands and press into the red copter base

Your model is now complete!

You’ve now brought the classic Inspector Gadget to life. From his iconic trench coat to his spinning copter hat, he’s ready to hover into action and take his place in your collection. Thank you for printing this model and for supporting Playco3D. I’d love to see your finished print, so be sure to share your photos!