Ready for adventure? Captain Toad has arrived! This colorful, multi-part print captures the brave explorer from Captain Toad: Treasure Tracker, complete with his signature backpack, bed roll, and headlamp. He’s curious, courageous, and always ready to chase treasure no matter the puzzle.

Best part? His headlamp actually lights up! An optional small magnetic LED sits inside, letting you bring Captain Toad’s iconic glow to life on your shelf.

Colors Used: Bambu Basic: Yellow (For Lamp - Non LED) Bambu Matte: Yellow (Head Strap), Black, White, Scarlet Red, Ash Grey, Desert Tan, Dark Brown Creality Hyper Series: Skin Geetech: Silk Gold Duramic 3D: Light Brown (Pick Axe Handle) Optional: Transparent Yellow for LED head lamp

Model Details: Scale: At 100% size, Captain Toad stands approximately 4.6 inches (117 mm) tall. Scaling up should work fine, but scaling down may cause issues with part tolerances due to small details.

Hardware Details: You can purchase the magnetic LEDs from Bambu Here is the link (https://us.store.bambulab.com/products/single-led-magnetic-control-switch-light) They’re simple to use with small batteries and include a magnet that triggers the light. Just insert the LED into Toad’s lamp, attach the clear cover, and attach the magnet to the top of his pickaxe. Tap the pickaxe to the lamp and watch it light up!

Assembly Tips To get Toad to sit flat, consider building the body first, then attach the backpack to the body. Place the feet on a flat surface then glue toad to the feet so he stands flat.

Before adding the belt buckle and straps, make sure the body is glued securely. This helps avoid any gaps. The same goes for the head — glue it firmly with the yellow strap in place before inserting the red spots. The red spots are designed to fit tightly and don’t require glue. Press them all the way in so they sit flush. Use the markings: B = back L = left R = right (Left and right refer to Toad’s left and right sides.) Attach the bed roll to the backpack before gluing on the top part of the backpack. Assembly Instructions Lower Body: Attach the pants, belt, and chest using the pin. Make sure everything is glued securely. Belt Details: Glue on the belt buckle press firmly (flat printed side facing up) and add the belt loops. Backpack Straps & Arms: Attach the backpack straps, pressing them in firmly until flush. Insert the arms and press them all the way in. Bed Roll & Backpack: Glue the bed roll together using the pin, then attach it to the backpack. Glue on the top part of the backpack, carefully lining it up, then add the backpack button. Attach the full backpack to the body using the pin. Feet & Balance: Place the feet on a flat surface. Attach Toad’s body to the feet to ensure he stands level, especially with the weight of the backpack. Head & Face: Connect the top and bottom head sections and yellow strap with pin. Make sure its glued tight before adding the red spots. Attach the face, then build and insert the eyes. Red Spots: Press in the red spots — no glue needed. Markings: B = back, R = right, L = left (based on Toad’s perspective). The front spots are cut for the head lamp. Final Touches: Attach the scarf to the body. Then glue the head onto the body using the pin. Choose either the LED or non-LED lamp and attach it to his head. Build the pickaxe and insert it into the backpack.

Your Captain Toad is ready for adventure! With his backpack loaded, lamp shining, and pickaxe in place, he’s all geared up to explore your display shelf or diorama. This model is packed with detail and charm, and now that you've brought him to life, you’ve got a true treasure on your hands.

Thanks for all your support and building Captain Toad! Happy Printing!