Halloween Cauldron: Light-Up Decor or Functional Container

Free for personal use for a short period of time

Looking for Commercial Use? If you're interested in using this designs for commercial purposes, please purchase my 'Early Adopter' or 'Maker' subscription. The subscription gives you the commercial licenses needed to sell physical items made from these designs.

Add a touch of magic to your Halloween decor with this versatile cauldron, perfect both as a decoration and for functional storage. Ideal for holding candies or as a striking centerpiece, this cauldron enhances the spooky ambiance of any setting. Print it with translucent PLA to allow for an LED light inside, casting an eerie glow that lights up the room. Whether illuminating your space or storing treats, this cauldron is an essential and enchanting addition to your Halloween celebrations.

Print Settings

• No brim required
• Supports required. I suggest printing with the top facing down. I used a 25-degree threshold angle with tree supports.
• 8-10% infill.
• 2-3 walls
• 0.4mm nozzle
• 0.2mm layer height

Print Settings for Clear Translucent PLA (for bubble lights):

• No brim required
• No support
• 0% infill
• 5 walls
• 0.4mm nozzle
• 0.2mm layer height

Important Note: I used a low-temperature LED candle for the bubble light. Please use a low-temperature LED to avoid damaging the PLA, which can melt at high temperatures. The creator assumes that users will conduct their own research to verify the suitability of the LED used and accepts no liability for any potential damages or issues.