tracking pixel
Liz B

Seattle Postcard HueForge

by
pezliz
Follow
Follow
Remix Model
pezliz
pezliz
|
Image 1 of 3
Seattle Postcard HueForge 3d model
pezliz
pezliz
|
Image 1 of 3
Seattle Postcard HueForge 3d model
2D
3D
Makes
Seattle Postcard HueForge 3d model
Seattle Postcard HueForge 3d model
Seattle Postcard HueForge 3d model

A HueForge "postcard" of a photo I took of Seattle's Space Needle! Play around with colours!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyLite Dark Blue Transmission Distance: 0.5 PLA PolyLite Lime Green Transmission Distance: 3.5 PLA PolyLite Stone Blue Transmission Distance: 0.5 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyLite Starlight Mercury Transmission Distance: 2.5

Swap Instructions: Start with Dark Blue At layer #9 (0.8mm) swap to Lime Green At layer #12 (1.04mm) swap to Stone Blue At layer #14 (1.2mm) swap to Steel Grey At layer #15 (1.28mm) swap to Starlight Mercury for the rest.


50 Likes36 DownloadsSeptember 20, 2023


50 Likes36 DownloadsSeptember 20, 2023