57 Likes39 DownloadsSeptember 8, 2023
From my personal photograph, I have transformed a Dahlia via HueForge! Try different colour combinations. INSTRUCTIONS: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Swap Instructions:
- Start with Dark Colour
- At layer #7 (0.64mm) swap to Medium Shade
- At layer #15 (1.28mm) swap to Lighter Shade
- At layer #21 (1.76mm) swap to White for the rest.
Categories:
57 Likes39 DownloadsSeptember 8, 2023
57 Likes39 DownloadsSeptember 8, 2023