HueForge - Pink Peony

A Pink Peony - my favourite flower! Play around with colours this HueForge version is very much artistic freedom! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Pro Magenta Transmission Distance: 1 PLA PolyLite Pink Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5

Swap Instructions: Start with Charcoal Black At layer #4 (0.4mm) swap to Magenta At layer #9 (0.8mm) swap to Pink At layer #15 (1.28mm) swap to White for the rest.