34 Likes20 DownloadsSeptember 22, 2023
A photo from TechJeeper transformed into a HueForge live on my Twitch stream! I used ProtoPasta Stardust in place of white for some extra jazz! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used: PLA PolyLite Dark Blue Transmission Distance: 0.5 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyLite Pro Red Transmission Distance: 1.5 PLA PolyLite Stone Blue Transmission Distance: 0.5 PLA PolyLite Pro White Transmission Distance: 5
Swap Instructions: Start with Dark Blue At layer #7 (0.64mm) swap to Steel Grey At layer #10 (0.88mm) swap to Red At layer #12 (1.04mm) swap to Stone Blue At layer #15 (1.28mm) swap to White for the rest.
Category:
34 Likes20 DownloadsSeptember 22, 2023
34 Likes20 DownloadsSeptember 22, 2023