Canadian Maple Leaf - HueForge

Play around with colour and transparency with this leaf in HueForge!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyTerra Army Brown Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite Pro Light Yellow Transmission Distance: 3

Swap Instructions: Start with Charcoal Black At layer #4 (0.4mm) swap to Army Brown At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to Yellow At layer #18 (1.52mm) swap to Light Yellow for the rest.