Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:6165394.

This is a collection of various Isolinear Chips I built in Fusion 360.  Some are based on inspiration from fan art and others are based on photo's of set used and unused props from the shows.  I have only printed these in resin on a Longer Orange 30.  I printed them flat without supports and didn't have any problems getting them off the build plate.

Hope you all enjoy these.

Star Trek Isolinear Chip Collection

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3109521.

Not quite sure how I managed it but this is a duplicate post of my design.  I will attribute it to User Error on my part.

Here is the original post which has a 2nd version of the stand.

https://www.thingiverse.com/thing:3109523 

Prop Replica Display Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3998664.

I decided to try my hand at building a working clock for a friend who wanted to gift it to someone they were going to visit.

All credit to Vector Design Store UA on Etsy for the SVG. I highly recommend them if you want to build any vector based 3d prints or laser cut designs:

https://www.etsy.com/listing/617303039/millenium-falcon-clock-filemillenium?ga_search_query=falcon&ref=shop_items_search_1&crt=1

I used the Vosarea Silent Quartz Wall Clock kit from Amazon for the clock hardware - usually runs about $10.00:

https://www.amazon.com/gp/product/B07RWV3G53/ref=ppx_yo_dt_b_asin_title_o01_s02?ie=UTF8&psc=1

I printed this in two colors of filament using my Prusa i3 MK3S and use the filament split in Prusa Slicer to print the top 3 layers in White Amazon Basics filament.  All lower layers in Prusament Galaxy Black.

I used an M9 threading tool to put threads in the center hole which the clock hardware screwed into perfectly.



Millenium Falcon Clock

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4541042.

Created to display the Galaxy's Edge Sith Holocron in active and inactive mode.

Sith Holocron Stand - Galaxy's Edge

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4541046.

Created to provide a stand for the Galaxy's Edge Jedi Holocron.

Jedi Holocron Stand - Galaxy's Edge

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4541059.

I was inspired by UnimatrixRed's Vertical Lightsaber stand ( https://www.thingiverse.com/thing:3339222 ).  I took the opportunity to learn more about tolerances and some other functions in Fusion 360.

All parts print without supports.

Print 1 base, 1 riser and 1 cap based on how tall the lightsaber is and where you plan to have the cap enclose the saber.

Super glue the riser into the base.  You should not need to glue the cap onto the riser.

Lightsaber Stand

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3113038.

A simple wall hanger/wall mount to be able to hang prop replicas (low weight items would be best).

Designed to accommodate things like the Art Asylum toy Phasers and such.

Put a slight curve to the surface touching the prop.  This should allow the prop to be settled on center and keep it from sliding side-to-side.

I would recommend printing at 10percent infill so the weight of the hanger is minimized and reserved for the prop as it will cause pull on the adhesive command strip.

This is for the Large 70x21mm Command strips.

Prop Replica Wall Hanger for Command Strip

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4540352.

I created this to allow for better display of the QMX (and other) magnetic backed Star Trek Cosplay badges/commbadges.

You will need to print 2 of the Stand Legs.

You can use this for pins with points/frogs but you will need to test place them and then use a small hand drill or Dremel tool to perforate the stand to allow the pins to push through and be secured with frogs.

Let me know if you would like to see other sizes.

UPDATE-01-22-2022:

Included a new STL file that has the two (2) legs and one (1) body for a complete stand, oriented correctly for print.  Hopefully this will make it easier for folks looking to print a stand.
 

Star Trek Magnetic Pin Stand (QMX)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4062028.

This wall mount will allow you to hang a single Pet Safe ScatMat model G402-5873.

Use Large Command Strips x 2 to mount it to the wall.

Pet Safe ScatMat Wall Mount - Model G402-5873

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:3140183.

Based on a question about making a prop stand for the Original Series Tricorder I decided to move this one up in my work queue.

The stand should be centered on the Tricoder prop width wise.  There will be some of the prop that hangs over on each side and is by design given the shape of the bottom of the prop from Diam Select and others like Master Replicas.

You should be able to have the lower compartment door open with the upper compartment door resting on it.  Please message me if you find that isn't uniformly true and I will mod this (just be sure to send me some images of the where your prop is catching on the raised edge of the stand.

I included a slot on the back to roll up the strap and have it rest behind the prop.  Just an option so if you prefer to have the strap loose by all means do so.

If you are displaying one of the heavier replicas like those produced by Master Replicas you may wish to bump up the infill to 30%.  I printed it at 15% for the Diamond Select toy version and it was well balanced and had no issues.

Star Trek The Original Series Tricorder Stand

Stand_Body.stl

Stand_Leg.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pdj

Achievements

Voyager

Seedling

Pinned models

Star Trek Magnetic Pin Stand (QMX)

Star Trek The Original Series Tricorder Stand

Millenium Falcon Clock

Star Trek Isolinear Chip Collection

Prop Replica Display Stand

Millenium Falcon Clock

Sith Holocron Stand - Galaxy's Edge

Jedi Holocron Stand - Galaxy's Edge

Lightsaber Stand

Prop Replica Wall Hanger for Command Strip

Star Trek Magnetic Pin Stand (QMX)

Pet Safe ScatMat Wall Mount - Model G402-5873

Star Trek The Original Series Tricorder Stand