We all know it's not going to happen, so I made it happen. I designed a Super Smash Bros Ultimate model for a Sommie amiibo. Doesn't work unfortunately, but it's cute.

I made it into 2 parts for easier printing and painting, the SSBU amiibo base and the Sommie model itself.

I printed it in PLA with 10% infill. The base didn't require supports, Sommie definitely did.

Sommie Amiibo (Fire Emblem Engage)

Sommie-Sommie.stl

If you're an impulse sunglasses buyer like me, you'll love this one.

The first component is a wall-mountable sunglass stand for a single pair. After that, you can print as many additional modules as you want, and they all attach to each other and the wall mount.

Printed in PLA, 10% infill.

Extendable sunglass wall mount

Modular sunglasses hanger- Wall mount.stl

A nail kit holder shaped like a spartan shield.

Printed in PLA with 5% infill and supports.

Spartan shield nail kit

A small box bearing the Crest of flames, from Fire Emblem: Three houses.

The box is hinged and prints as a single item. Printed in PLA with 10% infill and supports.

Includes versions with lid at 270º, 225º, 180º and 135º to choose from, depending on how your slicer behaves. I prefer the 135º myself.

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

Crest of Flames box

Crest of flames box 180g.stl

James Baxter!

Yeah, it's James Baxter from Adventure time, here to spread joy.

Printed in PLA with 100% infill and tree supports, Cura didn't really like some of my overhangs with regular supports.

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

James Baxter!

James Baxter!

Yeah, it's James Baxter from Adventure time, here to spread joy.

Printed in PLA with 100% infill and tree supports, Cura didn't really like some of my overhangs with regular supports.

Jake from Adventure time is back, only this time he took the shape of a bookmark.

Printed with PLA, ideally yellow I'd say, with 10% infill.

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

Jake the bookmark

Jake from Adventure time is back, only this time he took the shape of a bookmark.

Printed with PLA, ideally yellow I'd say, with 10% infill.

This is a wall mount for an Aeropress coffee maker. The base is hexagonal with a 8.7cm spread.

Printed in PLA with 10% infill.

v3: Added nail head hole for better support.

Aeropress wall mount

This is a wall mount for an Aeropress coffee maker. The base is hexagonal with a 8.7cm spread.

Printed in PLA with 10% infill and supports (just for the nail hole)

This is a wall mount for a small Moka pot. The base is a little over 9cm in diameter, the size of my small 3 cup Moka pot.

Printed in PLA with 10% infill.

v3: Added nail head hole for better support.

Moka pot wall mount

This is a wall mount for a small Moka pot. The base is 8.6cm in diameter.

Printed in PLA with 10% infill and supports (just for the nail hole)

Moka wall mount.stl

This is a stand designed specifically to hold a Focusrite 2i2, to be screwed into a desk/table. The inner size is 9.9cm deep and 4.8cm high, so it can hold anything within that size.

The model includes a back wall to add safety, and holes in the top and bottom, for screws and screwdriver respectively.

Printed with PLA at 10% infill and supports.



Focusrite soundboard desk holder

Sound board stand complete.stl

Sound board stand left.stl

Sound board stand right.stl

A small keychain modeled after the sword guard of Rengoku from Demon Slayer.

Printed in PLA with 10% infill, no supports required.

v3: Improved topology, increased size by 20%

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

Rengoku Sword Guard keychain

A small keychain modeled after the sword guard of Rengoku from Demon Slayer.

Printed in PLA with 10% infill, no supports required.

Rengoku Sword Guard KeyChain.stl

A small box modeled after BMO from Adventure time. For small items, also can be used as pencil holder. Includes lid.

Printed in PLA with 10% infill, supports on at 69º.

v2 fixes:
-Feet base were too short, so model tips. Made feet longer.
-Lid does not fit: adjusted size of inner box in lid.

v3 fixes:
-Fixed missing mesh in lid.

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

BMO Box

BMO box- Complete.stl

Jake the Brick from Adventure Time, modeled by me.

Printed in PLA with supports, 10% infill.

v2: Increased resolution

v3: Flattened base for easier adhesion

License: Attribution-NonCommercial-NoDerivs
CC BY-NC-ND

Jake the Brick

Jake the Brick from Adventure Time, modeled by me.

Printed in PLA with supports, 10% infill.

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

pablo.cassinerio

Achievements

Seedling

Debutant