tracking pixel
Noa A

Kabuto Slingshot Inspired by Usopp from One Piece

by
noaorialt
Follow
Follow
Remix Model
noaorialt
noaorialt
|
Image 1 of 4
Kabuto Slingshot Inspired by Usopp from One Piece 3d model
noaorialt
noaorialt
|
Image 1 of 4
Kabuto Slingshot Inspired by Usopp from One Piece 3d model
2D
3D
Makes
Kabuto Slingshot Inspired by Usopp from One Piece 3d model
Kabuto Slingshot Inspired by Usopp from One Piece 3d model
Kabuto Slingshot Inspired by Usopp from One Piece 3d model
Kabuto Slingshot Inspired by Usopp from One Piece 3d model

I made this using PLA+ at 5% infill density and it works fine. I'm using Staples brand #84 Rubber Bands and Hillman brand machine screws that have the item number 7671 (they're about one inch long). I tried using 3D printed screws for the piece that takes the most stress but they broke so I resorted to using metal ones and it works fine now. This isn't a 100% on model reproduction of Usopp's Kabuto, more like an interpretation that's a blend of the slingshot he uses in the beginning of the series and the Kabuto which he gets later. The base piece takes about 5 hours to print, the lid maybe 2 hours, and the "baller" piece takes one and a half. You'll need 4 of the "bolts" which each take around 15 minutes (these are to secure the base piece to the lid piece) and 4 of the "Band Holder" pieces which are meant to protect the rubber bands from directly rubbing against the metal machine screws.


2 Likes9 DownloadsMarch 13, 2024



2 Likes9 DownloadsMarch 13, 2024