Simples PET Gewinde, gedacht für Erweiterungen und Remixes! Gut geeignet für 3D-Druck-Geocacher! Gedacht um leicht an andere Objekte zu kleben oder direkt in Fusion 360 anzubauen.

Simple print

0.15mm for best results!

PET Deckel

Langeooger Wasserturm. The Watertower of Langeoog commonly mistaken for a lighthouse is an icon building for the north see of Germany! In simplified form and an easy print for any Seebär! 

0.2 mm
0.4 mm Nozzle

No supports needed!

G-Code mit lightning infill!

Langeoog Wasserturm

Super easy Santa hat for your IKEA GESTALTA! 

Very easy print, could be printed with filament swap or just colored. 

No Supports needed. Printed with PLA at 210° C on an Anycubic Vyper.

Santa Hat for IKEA Gestalta

Unser Quark ist immer alt geworden, da es keinen richtigen Deckel gibt. Ich habe einen simplen slide-on Deckel entworfen.

Dauer ist ca. eine Stunde
Verbrauch: ca. 4.2m

 

Material: PLA White
Print Temp: 200°C
Bed Temp: 60°C
Layer Height: 0.2mm
Print Speed: 60mm/s
Wall Speed 30mm/s

Supports: ja/nein (nicht notwendig, kann aber nicht ganz passen, wenn man es ohne Supports druckt. Supports können aber schwer zu entfernen sein...)
Support settings: Density: 15%, Lines, Distance X/Y: 0.2mm

QuarkDeckel v2 (1).stl

Made for business card sized 91mm x 61mm but will obviously fir smaller ones as well! 

Print takes quite a while as it is a large piece but looks great on any desk!

business card holder TAKE ONE

For PLA:

Temp: 200°
Bed-Temp: 60°
Supports: None
Layer height: 0.15mm
Print speed: 60 mm/s

Nicht ganz dicht!

Geht nach einiger Zeit an frischer Luft kaputt! PETG ist vielleicht eher geeignet. 

Witch Hat PET Geocache

Pokemon Zekrom made with 3D Scanner.

Print needs a lot of supports but comes out great! 

Printed in Galaxy Black PLA at 0.2mm standard Prusa settings on a MK3S. 

Zekrom

A 3D scanned statue of Mewtwo.

Requires supports around the tail, hand and best case also between the legs. 

Printed with PLA at standard Prusa settings for MK3S at 0.2mm! 

Mewtwo

Tiny statue of Anakin Skywalker from episode 2. 

Prints without supports!

Would not recommend scaling up! It is not very detailed!

Anikan Skywalker Miniature

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nilsgfx

Achievements

Seedling

Debutant