I got a bit carried away making the smallest earplug /case combo that I could. I made these earplugs that nest together to really minimize the stored volume. They can be tied to a loop by the hinge pin of the custom case. 

Unfortunately the nesting concept only works with the medium and large silicone tips that come with my Loop earplugs. 

EDC Earplugs and Case

Small Clamshell Square- small long.3mf

Some of my new Prana pants had the plastic button break. It's a bit different than a normal button and its not the fabric that broke, but the plastic button. I thought about messaging them but this solution seemed so easy.  If this happened to you too, this was a quick and easy fix. Part press fit together perfectly. I recommend using ABS or another high temp material to keep it from getting too soft in the dryer. 

Prana Pants Button Repair

Prana Pants Button.STL

I remixed my earplugs case to make a small desiccant holder to keep my cat treats fresh. I already had the silica for printing after all.

It's pretty quick and easy to fill half way, maybe a little tricky to fill to the top but it's not too bad if you can dip it into the container of silica. 

V2 changes the slots from 2mm to 0.9mm because some silica beads are small enough to fit through the 2mm slots

Desiccant Holder, Small Clamshell, print in place

Small Clamshell Square-dessicant.STL

I designed this to hold a pair or earplugs, but it could fit a variety of small things.

It is print in place and features a small tab for positive closure. I think I got the snap working perfectly. The hinge has a 0.25mm clearance which worked perfect on my P1S. I printed mine in PLA silk at 0.16mm layer height.

My round case was quite popular so I decided to make a square one for some variety.

Earplug Case, Small Clamshell Square

Small Clamshell Square.STL

Wind too strong? Snap a pole or two on your pop-up canopy? If you want to try repairing it give this bracket a try. It is designed for a square pole dimension of ~10.15 x 22.5. You should be able to scale it to match, but PM me if you have a different pole dimensions, and I'll upload another version

Part is intended to be printed with 5 or 6 walls at 0.4mm. I would recommend PLA+ as you want something stiff to attach to the metal poles. 

What you'll need:
Epoxy, I used JB Weld. 
A socket set to tighten the bolt on the bracket side.
A second wrench, any style, for the other side.

Instructions for installation:
1. Print
2. Remove Bolt and set aside.  
3. Apply epoxy to the inside of the bracket. 
4. Attach to the pole with zip ties. Bracket should sit on the outside of the joint. 
5. Adjust the canopy to minimize the gap in the snapped ends. 
6. Let the epoxy cure.
7. Reattach bolt. 
8. Fixed!

Easy Up Repair Bracket, 22.5 x 10.15 pole

Easy Up Repair Bracket.STL

This lid is designed to fit on top of a pill bottle to hold half pills. I printed mine from TPU for a soft fit

Pill Bottle Storage Lid, Walmart

Walmart Pill Bottle storage lid.STL

I designed this to make use of all the silicone tips that are not my size that come with my earplugs and give them away at shows. I suspect they are not as good as the real thing but better than foam ones. 

Features a hollow interior to help carry the treble through. Pairs well with my print in place clamshell. 

I printed mine at 0.08mm and they look great. 

Earplug Inserts for Silicone tips

Loop Ear plug inserts-0.2.STL

I designed this to hold a pair or earplugs, but it could fit a variety of small things. 

It is print in place and features a small tab for positive closure. I think I got the snap working perfectly. The hinge has a 0.25mm clearance which worked perfect on my P1S

Earplug Case, Small Clamshell

Small Clamshell2.STL

Hi! I'm having a good time posting up models when I can't find what I am looking for on here. DM me on Insta @nckclinton if you have a design idea that you think I could work on. 

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nickolas.clinton1

Achievements

Seedling

Debutant