CompassCNC Linear upgrade Z axis Housing - please download the backet as well: https://than.gs/m/1399797

Made for the CompassCNC project: https://www.compassrouter.com/

Z bracket for use with the 65mm spindle mount: https://www.aliexpress.com/item/1005006113911943.html

Additional hardware: 2 x 100mm MGN9C rail and linear bearing 12 x M3 20mm hex screws and nuts - locknuts preferred

**Check M8 bolt length for spindle clamp - these should extend a further 10mm beyond clamp back to ensure length for nuts in back of this 3D printed mount. Mostlikely will need to purchase.

Note: This part has not yet been printed and tested. Please provide feedback if model requires alterations.