Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4927187.

Created a fan cover for my "hero yourself" hotend cooler mod for my SOVOL SV01 and figured I would share if anyone else wants to use it. :)

40mm Fan Cover for SOVOL printer

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5184130.

This is a quick minimal design for a vehicle dash mount that holds the Caliburn A2 while not being used. There is a hole in the bottom to access the charging port and a medium command strip can be used to mount to a flat surface in your vehicle.

The tolerances are not tight and this does not grip the mod in any way. It goes about a third of the way up the mod and doesn't allow it to fall out but also doesn't risk hitting the fire button.

Update 1-12-2022: Found it to be just a touch difficult to line up when placing the mod into the holder while in the vehicle. Resized it so that a slight incline could be added and act as a guide to slide it in. Also resized the distance of the backplate to have a 3mm gap between the holder and the backplate. This way, traditional usb cords can tuck inside for added organization. Please use the file labeled "V2" if you want to use this version instead.

Caliburn A2 Vehicle Dash Mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5824005.

My wife was looking all over for a container with a little heart as the handle for the lid. Since she didn't like the style she could find, I just made one to her liking. This is a scalable container at the z-height so you can make them shorter or taller. The heart fits into a small opening on the lid and needs just a dab of glue to make a lasting handle. Print in the orientation from the stl, the heart handle will need just a tiny bit of support for the peg insert. I printed with 20% infill but if you want the base to be heavier just add more. Enjoy and modify to your "heart's" content. lol!

Heart Container

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4903921.

Two different kinds of hooks for hanging things on the wall. I created them to hang tools I use daily on a board behind my printer. Hopefully others will get some use out of them too. Print them with the hook facing up and no supports will be needed.

Simple wall mounted hooks

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4882347.

I use the SH-01 filament dryer with the Sovol SV-01 and placed it on the right side of the printer. I wanted a better way to guide the filament from the top of the SH-01 into the filament sensor mounted on top of the printer using this sensor holder form JSchulze: https://www.thingiverse.com/thing:4702282

This utilizes the bolts and wing nuts that came with the stock filament holder on the SV-01.

Would most likely fit other printers with similar framing.

UPDATED: 9/17/2021 "Straight filament guide updated" file has the logo removed, mount holes slightly resized, and the angled roof section above the screws re-worked to print cleaner.

Sovol SV01 filament guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4903924.

I needed a couple wall mounts for my work laptop but had a hard time finding ones that fit snug for my Dell Latitude 7480. I took some inspiration from user DanielStein (https://www.thingiverse.com/thing:449152) and came up with a nice snug fitting mount.

Thin profile laptop wall mount

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5220120.

This is a mount for the extruder stepper motor to offset the distance for a genuine E3D extruder to be mounted on a Sovol SV01 (could also work with other Sovol models but have not tested). This places the large gear nearly in the middle of the cutout on the stock bracket as seen in the pictures. This allows the user to use any stock orientation parts with the E3D extruder, or also allows the use of a E3D Extruder and V6 hotend combo which is the setup seen in the pictures. I printed this in PETG for strength and flexibility but could be printed with PLA as well.

SV01 E3D Titan Extruder Stepper Mount (4mm offset)

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5973089.

I have started creating a few different decorative shelves that I can place around the house. There is a honeycomb style and a Circles style so far, more to come. Print in the orientation they are in for strength and ease of printing.

Shelves are 200mm wide by 100mm deep and 4mm thick.

Decorative Shelves

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:4882343.

Large container of all things smaller than said container. 100mm tall by 150mm wide.

Large Container of Things

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

newdawnccg

Achievements

Trailblazer

Seedling