On their favourite holiday of the year, the Boo-Crew puts on their best costumes and heads out to trick-or-treat like all the other kids. Nothing gets in their way...literally, they just walk through things because they're still ghosts. Don't ask how their costumes stay on, that's just ghost logic!

Printed at 100% scale it fits a LED tealight under to illuminate it. At 50% they work beautifully with balloon lights that can be found here:
https://www.amazon.ca/gp/product/B09DSSVDKK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Print settings:
2 walls
5% lightning infill to give it a clean glow
Supports required for hat brims
Brim is optional

Boo-Crew Lanterns

Cowboy ghost.stl

First of all, thank you for considering joining my Thangs membership. By subscribing to my Thangs plan, you gain access to the current month's model and all previous models released. Minion members **do not ** have the ability to sell the physical prints of all models. This tier is strictly for personal use. If you would like to be able to sell my designs, please check out the "Nerd" membership. At no time do you ever have the right to sell or share the digital file of the model.

Modifications of files are not allowed unless first verified by me.

NerDIY Minions

First of all, thank you for considering joining my Thangs membership. By subscribing to my Thangs plan, you gain access to the current month's model and all previous models released. Nerd members have the ability to sell the physical prints of all models as long as they are paying members. At no time do you ever have the right to sell or share the digital file of the model.

Modifications of files are not allowed unless first verified by me.

NerDIY Nerds

Rusty started on a production line back in July of 1986 and, due to some poor investments in the stock market and inflation, the factory was abruptly shut down mid August. Rusty, and all his friends, lay abandoned on the conveyor belts, completely assembled but Rusty was the last lucky robot to be programmed before the technician was forced to leave. 

His luck ended there, however, as they were all locked inside the factory until just recently. Technically they function, they need programming, but most of all, they need a lot of love to overcome their abandonment issues.

Tested from 100 - 60% with no issues or supports required. I highly recommend a brim for 80% and less. Smaller prints might be weaker, and prints larger than 100% would likely require supports due to overhangs.

Available in 3mf and STL for multicolour or single colour printers.

Rusty the Robot

Rusty Robot 3MF.3mf

Rusty Robot STL.stl

Meet Kip the Knight! He's brave, strong, and not so great with a sword. Honestly, he was supposed to be a King's guard until they tested his fighting skills. They felt it was best he was in charge of shining the shields instead of being on the front lines. Unfortunately, Kip created mirrored shields which worked well for blinding the enemy, except it also started brush fires in the camps. Kip has had a bit of a difficult time fitting in, he's always been...different.

Tested from 100 - 60% with no issues or supports required. I highly recommend a brim for 80% and less. Smaller prints might be weaker, and prints larger than 100% would likely require supports due to overhangs.

Available in 3mf and STL for multicolour or single colour printers.

Kip the Knight

Kip the Knight STL.stl

Kip the Knight 3MF.3mf

Meet Beauregard the Bat! Originally from an attic in a musician's house in New Orleans, Beauregard has finally left the French Quarter to venture out on his own. Would you believe he plays the trumpet? It is a bit tricky with his fangs, but he's spent years mastering his craft and studying under the very talented musician he lives with. Out on his own, Beauregard is looking for friendship, a nice conversation over a Pimm's Cup, and maybe some fun nights out dancing.

Tested from 100 - 50% with no issues. Supports are required for his snout and fangs. If your printer is decently tuned, the wings and ears shouldn't require supports.

Available in 3mf and STL for multicolour or single colour printers.



Beauregard the Bat

Beauregard the Bat 3MF.3mf

Beauregard the Bat STL.stl

Just a DIY nerd trying to make it in the galaxy with her 3D printing wits about her. 

My name is Julie, I am the owner of NerDIY Studios, fueled by caffeine, a wife, a mom of 2 kids, and working on making this business a full time venture. I started 3D printing and designing cookie cutters and cake toppers in 2020. As I've grown and learned more, I have ventured into more organic modeling.

Everyday I learn and grow in what I am capable of designing and I look forward to putting out monthly models; themed and otherwise. Some will be sculpts and some will be articulated/flexi-pieces.

Join my Nerds membership plan for the ability to sell my models commercially or join the Minions membership plan for personal use!

Thanks for stopping by :)



Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

nerdiystudios

Achievements

Seedling

Trailblazer

Pinned models

Rusty the Robot

Kip the Knight

Beauregard the Bat

Boo-Crew Lanterns