More info and 3D printing footage in this video: https://www.youtube.com/watch?v=y0v3S_KXuB0

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Ikea Vesken leg covers - feet

More info and 3D printing footage in this video: (coming soon)

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

This is a minimalistic insta360-GO camera mount for the Diatone Q33 tiny RC cars. It is a combination of minimicroFPV's design (https://www.thingiverse.com/thing:4317063) and Diatone's 3D file.
I printed it in TPU and screwed it onto the canopy of the car with truss screws (make sure you use screws with very slim head, otherwise it will touch the battery and push the motor cover - which can make the motor bind).

More info and 3D printing footage in this video: https://youtu.be/dA7VcXmBALE
Disassembly video can be found here: https://www.youtube.com/watch?v=UUrXhgWPSto

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Diatone Q33 insta360 GO minimal camera mount

This is a minimalistic insta360-GO camera mount for the Diatone Q33 tiny RC cars. It is a combination of minimicroFPV's design (https://www.thingiverse.com/thing:4317063) and Diatone's 3D file.
I printed it in TPU and screwed it onto the canopy of the car with truss screws (make sure you use screws with very slim head, otherwise it will touch the battery and push the motor cover - which can make the motor bind).

More info and 3D printing footage in this video: (coming soon)
Disassembly video can be found here:

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Double message illusion text ornament for your FPV workbench, with the cold hard truth of the "FPV routine": it reads "SENDIT" when you leave the house... and "REPAIR" when you get back... :) :) :)
Created with gitPharm01's tool on github: https://gitpharm01.github.io/designs/dualText/part1.html
I had to clean up some details afterwards in Tinkercad. Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

Printed with supports which were removed fairly quickly. The hardest one was the first letter (S/R).
More info and 3D printing footage in this video: (coming soon)

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

FPV illusion text SENDIT - REPAIR workbench ornament (muteFPV)

This is a very cool design I found online for a multi-microSD card holder. The original design is by kozalakisk and the original remix by Kroki. I just added the text "FULL" at the bottom.
For the sake of convenience, I included the original remix by Kroki (without any text at the bottom).

More info and 3D printing footage in this video: https://www.youtube.com/watch?v=XWjbD5kkod8

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM


This is a remix from: https://www.thingiverse.com/thing:4574249
which is based on this original design: https://www.thingiverse.com/thing:5025071


Multi microSD card carrying case with sliding SD card cover ("FULL")

This is a very cool design I found online for a multi-microSD card holder. The original design is by kozalakisk and the original remix by Kroki. I just added the text "FULL" at the bottom.
For the sake of convenience, I included the original remix by Kroki (without any text at the bottom).

More info and 3D printing footage in this video: (coming soon)

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM


This is a remix from: https://www.thingiverse.com/thing:4574249
which is based on this original design: https://www.thingiverse.com/thing:5025071


SdCard_Box FULL.stl

This design starts as a small triangle on the print bed surface and extends at an angle of 45 degrees up to a (vertical) height of ~100mm.
Its overhanging side slowly converts to a half-conical shape, which varies the speed and movements of the print head and print bed during the test.
I printed it in spiral (vase) mode and added weight from the tip of the print after it cooled down to 25 degrees Celsius (77 F).

More info and 3D printing footage in this video: https://www.youtube.com/watch?v=OM1NdekgLlM

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

ADHESION TEST - test 3d printer bed adhesion

This design starts as a small triangle on the print bed surface and extends at an angle of 45 degrees up to a (vertical) height of ~100mm.
Its overhanging side slowly converts to a half-conical shape, which varies the speed and movements of the print head and print bed during the test.
I printed it in spiral (vase) mode and added weight from the tip of the print after it cooled down to 25 degrees Celsius (77 F).

More info and 3D printing footage in this video: (coming soon)

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

This cross shaped design has a V-shaped cross-section and very little contact area with the 3D printing bed surface.
It has worked great for me and has helped me identify air draft related adhesion problems - I have placed panels on the left, right and back of the printer, which are not air-tight but have solved the few issues I have had.

More info and 3D printing footage in this video: https://www.youtube.com/watch?v=OM1NdekgLlM

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

WARP TEST - test warping of 3d printing bed surface

This cross shaped design has a V-shaped cross-section and very little contact area with the 3D printing bed surface.
It has worked great for me and has helped me identify air draft related adhesion problems - I have placed panels on the left, right and back of the printer, which are not air-tight but have solved the few issues I have had.

More info and 3D printing footage in this video: (coming soon)

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

I am using the BenQ eReading Desk Lamp WiT both as a (duh) desk lamp and as a fill light for my studio bench setup. This "third arm" follows the lamp's design, is clamped on the lower arm and retracts to support the lamp and extend the lamp head horizontally, far away from the base. If you flip it, it can also be used as a headphone holder.

Hardware needed:
1x Philips drive pan washer head M4 screw to attach the ARM to the HUB and match the other stock screws of the arm joints.
2x M3 hex screws to clamp the lamp's arm with the two HUB pieces. These screws also act as end-stops for the arm.

More info and 3D printing footage in this video: (coming soon)

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@  Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @


Third Arm for the BenQ e-Reading Desk Lamp WiT

BenQ support ARM.stl

These monitor stand feet can slide onto 25mm thick melamine sheets and be secured in place with screws underneath. They are very sturdy to lift big PC monitors (such as my 32" main monitor) which sadly does not have a VESA mount. On the side I have a vertical 27" monitor on a monitor arm.
My monitor stand fits a tenkeyless keyboard underneath but you can fit any heaboard just by using a longer piece of shelf / wood / melamine. It slides perfectly over a 25mm thick by 190mm wide piece and can be even friction-fit without the screws.
You can stick adhesive anti-slip pads under each "foot".

You can find more info, footage / octolapse of the print and footage of the final result in this video: (coming soon)

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

I designed it from scratch but was inspired by this design: https://www.thingiverse.com/thing:4656621

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Computer Monitor Stand heavy duty shelf legs feet honeycomb

Monitor stand MUTEFPV with pattern.stl

I modified the VTx antenna holder designed by Haku3D, to fit my slightly larger Foxeer micro Lollipop antennas. Make sure that the coax cable of the antenna is long enough to plug into the VTx, if yours is installed as a stack above the FC/ESC AiO.
More info and 3D printing footage in this video: https://www.youtube.com/watch?v=dl_FEyPiurg

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

Original design: https://www.thingiverse.com/thing:4832807

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Five33 Tiny Trainer VTx antenna holder for the Foxeer Micro Lollipop

This is a remix of two very good battery holder designs for the Five33 Tiny Trainer: it combines the easier-fit tray by 435FPV, which fits the Tattu R-Line 3S 550mAh packs I use perfectly, and the tray for washers by M0ist0ne_fpv that has enough space around the mounting holes for nylon washer inserts, which help the print stay in place compared to the very little area the screws can grab onto with the original tray design.
More info and 3D printing footage in this video: https://www.youtube.com/watch?v=dl_FEyPiurg

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

Original designs that I modded / combined:
https://www.thingiverse.com/thing:4363624
https://www.thingiverse.com/thing:4510881

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Five33 Tiny Trainer easy-fit Battery Tray for nylon washer inserts

This is a remix of two very good battery holder designs for the Five33 Tiny Trainer: it combines the easier-fit tray by 435FPV, which fits the Tattu R-Line 3S 550mAh packs I use perfectly, and the tray for washers by M0ist0ne_fpv that has enough space around the mounting holes for nylon washer inserts, which help the print stay in place compared to the very little area the screws can grab onto with the original tray design.
More info and 3D printing footage in this video: https://www.youtube.com/watch?v=dl_FEyPiurg

Here is how you can easily modify this (and any other) design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

I remixed an already well thought-out design for the Emax Tinyhawk stock carrying case, in order to fit a lot of 1S and 2S batteries and also have space for a set of spares and accessories. It also prints a bit faster than the original.
More info and 3D printing footage in this video:  https://www.youtube.com/watch?v=NfS3px9QyyU

You can find the original design by Kororor for the Tinyhawk I here: https://www.thingiverse.com/thing:3710704

Here is how you can easily modify the design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

FPV Emax Tinyhawk case insert (Tinyhawk I, S & Tinyhawk 2)

I remixed an already well thought-out design for the Emax Tinyhawk stock carrying case, in order to fit a lot of 1S and 2S batteries and also have space for a set of spares and accessories. It also prints a bit faster than the original.
More info and 3D printing footage in this video:  https://www.youtube.com/watch?v=NfS3px9QyyU

For some reason I cannot add the remix source files in the upload - You can find the original design by Kororor for the Tinyhawk I here: https://www.thingiverse.com/thing:3710704

Here is how you can easily modify the design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

A simple, small and sturdy hanger for FPV drones. It mounts with just one screw and holds the dirty quads away from the wall/cabinet, holding them from one of the motors.
It prints fast and can easily hold the weight of a normal FPV drone.
There is no direct sunlight in my case so I went for PLA+ filament.
More info and 3D printing footage in this video: https://www.youtube.com/watch?v=3AHr3Tkd_5w

Here is how you can easily modify the design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

FPV drone wall motor hanger

A simple, small and sturdy hanger for FPV drones. It mounts with just one screw and holds the dirty quads away from the wall/cabinet, holding them from one of the motors.
It prints fast and can easily hold the weight of a normal FPV drone.
There is no direct sunlight in my case so I went for PLA+ filament.

Here is how you can easily modify the design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

With this adapter you can use any common pot knob (guitar knobs etc) on your Radiomaster TX16S / TX16S MAX or Jumper T16 / T16 Pro radio. It will extend the potentiometer shaft outside the front of the shell.

I have included a long and a short version, since the part that protrudes from the shell depends on the type of knob you want to install.

I have also included all the individual pieces of this pot extension adapter, so you can make your own version if you need something different. Here is how you can easily modify the design in Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

The LEDGE version has not been tested yet. If you try it, let me know in the comments. The idea is to be able to add a mechanical keyboard o-ring between the top of the ledge and the backside of the shell, so that the pot knob has more friction. The stock potentiometers are a bit loose.

==> more info in this video playlist: https://www.youtube.com/playlist?list=PLT1bw0pJRpO3EWJ7MsYSMeR8TLResWQYm

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Pot knob extensions for Radiomaster TX16S & TX16S MAX, Jumper T16 and other radios

LONG Potentiometer extension.stl

This gimbal stick protector is for 10mm stick-ends on a TX16S MAX radio (or a TX16S radio with gimbal rings).
If you want the engraved text to have a different texture from the rest of the bar, print it upside down (with the text touching the build plate).

I scaled the round shape of the stick protectors down a bit so I can add and remove them more easily. I use a Betaflight Hive backpack which protects the radio very well anyway.

==> more info in this video playlist: https://www.youtube.com/playlist?list=PLT1bw0pJRpO3EWJ7MsYSMeR8TLResWQYm

@ Here is how you can modify any STL files easily, using Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

This is a remix from https://www.thingiverse.com/thing:4574249

Radiomaster TX16S MAX Gimbal Stick Protector 10mm (modular)

TX16S MAX 10mm Gimbal Stick Protector.stl

Side sliders for the Radiomaster TX16S, TX16S MAX and Jumper T16 / T16 Pro radios.
Thicker, shorter and curvier. Add a rubber O-ring for a better feel.
Print one RIGHT and one LEFT piece.

==> more info in this video playlist: https://www.youtube.com/playlist?list=PLT1bw0pJRpO3EWJ7MsYSMeR8TLResWQYm

@ Here is how you can modify any STL files easily, using Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

This is a remix from https://www.thingiverse.com/thing:4462684

Radiomaster TX16S and Jumper T16 Pro side slider handles (left and right)

TX16S LEFT slider handle.stl

Extra long leg extensions (194mm with the base) for the IKEA LACK table.
The base is mounted with screws on the surface and the extensions slide in and out.
There is a solid "wall" surface at a 45 degree angle to prevent air drafts, if you decide to use panels between the legs.

Probably one of the tallest and fastest-to-print leg extensions you will find...
You can even fit an Ender 3 with tennis ball soft-mounts under these.

@ Here is how you can modify any STL files easily, using Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

Inspired by this design: https://www.prusaprinters.org/prints/10040-ikea-lack-table-leg-extension/files

Extra long IKEA LACK table modular leg extensions 194mm (removable)

Mount and cover for a filament runout sensor switch. It can be screwed above the 3D printer (on the IKEA LACK table surface or other). Filament tube goes through both sides (and through the table surface) for a smooth filament feed.

@ Here is how you can modify any STL files easily, using Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

This is a remix from https://www.thingiverse.com/thing:3052714

Filament runout sensor switch & filament guide for IKEA LACK table

Mount and cover for a filament runout sensor switch. It can be screwed above the 3D printer (on the IKEA LACK table surface or other). Filament tube goes through both sides (and through the table surface) for a smooth filament feed.

@ Here is how you can modify any STL files easily, using Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

This is a remix from https://www.thingiverse.com/thing:398515

LACK filament sensor.stl

Wall mounted (or cupboard door mounted) holder for headphones.
Very solid and easy to print.

I liked the idea of the original design but wanted it to look more unique.
It now prints faster and looks awesome!

@ Here is how you can modify any STL files easily, using Tinkercad: https://www.youtube.com/watch?v=JZXR5rOJ_QM

@ Share and leave a tip if you liked this design! https://www.mutefpv.com/paypal @

This is a remix from https://www.thingiverse.com/thing:971621

Headphone stand wall mount holder

Headphones stand (wall mount).stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

muteFPV

Achievements

Seedling

Debutant