Cards Lair Pro Deck Box

Designed for the Cards Lair Pro 1000. Should fit any of this kind of style deck box, though, really. Dimensions are roughly the same (A couple of millimetres smaller width/depth than the inserts for the Ultimate Guard Flip'n'Trays, but a little taller than them to clear the brim of the cards lair).

Specifically designed and made for these, though:

https://www.gamegenic.com/product/cards-lair-pro/?attribute_pa_color=gray-red

Printed at 200% speed on an Elegoo Neptune 4 with generic PLA. No supports used.

It might be worth noting that I removed sharp corners and edges with a light sanding post-print. I did a little de-bur to clean up the underside of the top handle, due to printing without supports.

NOTE: These boxes will need some light sanding on each face in order to fit. They've been purposely designed to be a fraction of a millimetre too big, as I like the sanded look. Print at 99% scale if it isn't your thing. (Not tested, the inside tolerances for cards is fairly tight).