This is a repost - some people encountered a problem downloading some of the STL files and I couldn't determine the cause, so I am re-uploading everything.
This is a pivoting dual fan soldering smoke extractor I designed to be used on a tabletop, or it can be placed on a shelf overhead with the fans pivoted down, for soldering taller / larger objects. I used standard grey and black PLA, dried to 10% moisture and printed at 50% triangular infill.
I used the following items from Amazon Italy. If you're in a different country, Amazon will most likely have the same items or something very similar.
12CM 12v fan - https://www.amazon.it/dp/B00H83TW56?psc=1&ref=ppx_yo2ov_dt_b_product_details These fans sell out often, but if so don't worry - there are tons of other 12CM 12v fans available on Amazon.
12v switches - https://www.amazon.it/dp/B09D9Q99QH?psc=1&ref=ppx_yo2ov_dt_b_product_details
12v pre-wired LED's w resistor - https://www.amazon.it/dp/B07R7KBNXQ?psc=1&ref=ppx_yo2ov_dt_b_product_details
12v 17CM led light bar - https://www.amazon.it/universale-fendinebbia-striscia-flessibile-impermeabile/dp/B07FTS5G5G/ref=sr_1_11?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=SN888IRTQG4T&dib=eyJ2IjoiMSJ9.jzIfcHSkiLb1c4JjWi8JSca_beLR2uEQ6QiPsXe9HqnM8jrAcCVqrtff4jBIP2poT66rVCydUO5Oz2QvfHa728xNJIaZNb2bxo1KaVT7LIpuj2x9-cnx8vwTMkVOcSuX_FIX8va2aQ4OYVd5F11mknEN-aFoeXswKAWI2UdaVj6K-NFTj4TXjaScWGfynsU46CI0JVC-iojy0f-Sa-po6nTqOrEV9iC1M3eYxqctXTIiMrTU7qJvYOZJhdj1du2kd0dCgs_zdqRaeqHughXLV33AENUOSJxuFA_4kso_vw4.d05v5CXy7WES6C8nIsL4IC3SUjowwxg2a6vXxNA4SEE&dib_tag=se&keywords=luci+diurne+LED+17cm&qid=1713298677&sprefix=luci+diurne+led+17cm%2Caps%2C95&sr=8-11 NOTE - the wire on these LEDs is very thin, I recommended replacing it with 18 gauge wire.
18 gauge wire - https://www.amazon.it/dp/B0BCG52WGM?ref=ppx_yo2ov_dt_b_product_details&th=1
Heat shrink tubing - https://www.amazon.it/dp/B07R7KBNXQ?ref=ppx_yo2ov_dt_b_product_details&th=1
Wire loom - https://www.amazon.it/dp/B07PXD9GMP?psc=1&ref=ppx_yo2ov_dt_b_product_details