tracking pixel
Rye M

Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments

by
moorefamily3d
Follow
Follow
Remix Model
moorefamily3d
moorefamily3d
|
Image 1 of 6
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
moorefamily3d
moorefamily3d
|
Image 1 of 6
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
2D
3D
Makes
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
Stained Glass Rose, Cathedral, and Spiderweb Hanging Window Decorations or Ornaments 3d model
This model is restricted by licensing terms. 

For commercial rights and access to all of my designs to date and upcoming, join my Thangs HERE or Patreon HERE

These striking hanging window decorations can be printed as open lattice or with an added layer for a stained glass appearance.

This look can be achieved on a single color printer with translucent filament and a filament change at the 4th layer for 0.2mm layer height or 3rd layer for 0.3mm layer height. Add another filament change at the rim to make it really pop! Quick and easy to color with smart fill for multicolor prints, too.

Very fast prints with 0.3mm layer height, with no effect on detail. All but the cathedral only require 5% infill. 10% or more is best for the cathedral to keep the top surface smooth.

Can be scaled up or down, but may need thread or fishing line to attach to hanger if scaled down.


15 Likes33 DownloadsAugust 31, 2024


15 Likes33 DownloadsAugust 31, 2024
This model is restricted by licensing terms. 

Instructions

Filament • 0.3mm

MaterialPLA
Layer height0.3 mm
Infill density10 %
SupportsNone
BrimNo