Wolverine & Deadpool disk. Looking forward to seeing the new movie so I put this together based off of a graphic found online. Talented designers already uploaded the half heart pendent so I put together this circular one.
Eye on Deadpool side was glued into place. You can glue the 2 halfs together, drill a hole in one side and boom, you have a keychain.
Notes: I have it set up as different pieces for multi color printing or easy painting. Also uploaded combined files.
DP.stl = Deadpool side * started black, stopped print and changed to red when lip started printing.
Wolv.stl = Wolverine side started yellow stopped print and changed to black when mask started printing.
Eyes-white.stl = separated out eyes. *they fit snug when I printed them, may require some sanding for fitment.
WD-combined-w-eyes.stl = everything combined into one object.
WD-combined-no-eyes.stl = eyes removed if you want to print them separate in white.
Scaling down would probably make the eye tolerances really tight. Mine fit snug at default size.
At 100% its about 75mm wide x 75mm tall and 6mm thick.
Design inspired by screenpai3d fan art found here
Print Settings: Printer brand: Longer Printer: Longer LK5 Pro Rafts: No Supports: No Resolution: .2 Infill: 20% Filament brand: Esun / Elegoo Filament color: Yellow / Black Filament material: PLA