tracking pixel
Mitchell F

YuGiOh Playmat

by
mitchellfranklin
Follow
Follow
Remix Model
mitchellfranklin
mitchellfranklin
|
Image 1 of 5
YuGiOh Playmat  3d model
mitchellfranklin
mitchellfranklin
|
Image 1 of 5
YuGiOh Playmat  3d model
2D
3D
Makes
YuGiOh Playmat  3d model
YuGiOh Playmat  3d model
YuGiOh Playmat  3d model
YuGiOh Playmat  3d model
YuGiOh Playmat  3d model

This play-mat is designed for use with or without approved card sleeves.

  • The Extra Deck is set to handle 15 Cards
  • The Main Deck is set to handle 50 Cards
  • The Graveyard is set to handle 40 Cards

This is designed for use with the classic rules however will look to add in the additional summon zones for single summons at a later date (Since I play classic).

Each STL has the details of how to print.

I printed these using Draft (.3) and 10% infill for the main parts while the Pins and Axel at 50%.

The left and Right Magic Areas have a single hole to link up to required side component i.e. Card Deck or Terrain.

When putting together I used needle nose pliers to hold the pins and a rubber mallet to tap into the holes.

Ensure you together the Card and Magic ares first then put all together .


5 Likes33 DownloadsFebruary 6, 2023



5 Likes33 DownloadsFebruary 6, 2023