This is a filament painting of an awesome zombie. It was made by using Midjourney. Printed at 154x200 @ 2.mm
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PrintBed Black
PrintBed Grey
Printbed White
Swap Instructions:
Black until layer #7 at 0.64mm
Brown until layer #19 at 1.6mm
White for the rest.
9 Likes17 DownloadsSeptember 17, 2024
9 Likes17 DownloadsSeptember 17, 2024