**_This design was made with you in mind :)_**

These baby month signs are the perfect way to remember any child's first year! Either print these and give them as a gift, or print them for your own daughter and have her hold them as she grows her first year! I made these for my cousins daughter :)
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**

**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the models without supports and display them for all to see! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Bambu Lab Matte PLA (Latte Brown) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
Bambu Lab Matte PLA (Ivory White) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
Bambu Lab Matte PLA (Lilac Purple) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)

**Print settings**
Material — PLA
Print orientation — prints as shown in the slicer image!
Nozzle size: 0.4 mm
Layer Height: 0.16mm (it may help to use a brim to avoid warpage when loading up the build plate!)
Infill: 15%
Bed Size of my Printer: 256x256mm

\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

BabyAgePlacards

babyAGEcards.3mf

**_This design was made with you in mind :)_**

These woven storage cups are perfect for holding desk accessories, being a table centerpiece, or being home decor! The model prints completely without supports and requires no special settings. These organic models will surely catch the eyes of anyone visiting your living space!

**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**

**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the models without supports and display them for all to see! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Polymaker Matte PLA (Beige) — https://amzn.to/3yHIkDL
OR
Bambu Lab Matte PLA (Latte Brown) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
**Print settings**
Material — PLA
Print orientation — prints as it stands!
Nozzle size: 0.4 mm
Layer Height: 0.2mm Standard
Infill: 15%
Bed Size of my Printer: 256x256mm

Note: The model does not print perfect due to the small overhangs, but nothing that can’t be touched up with tools!
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

WovenCups

woven_cups.3mf

**_This design was made with you in mind :)_**

This twine-looking woven pendant lamp shade is a perfect accent for creating a boho themed living space! The model was printed in Bambu Lab Matte PLA (Dark Brown) and  does require tree supports to create the cross-beams for mounting the pendant light kit! 
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**

**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the model, add the pendant light kit and a light bulb, throw it on a ceiling hook, and display it for all to see! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Amazon Pendant Light Kit — https://amzn.to/3AxENJi
Bambu Lab Matte PLA (Dark Brown) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)

**Print settings**
Material — PLA
Print orientation — prints as shown in slicer image! 
Nozzle size: 0.4 mm
Layer Height: 0.28mm (FUZZY TEXTURE!)
Infill: 15%
Bed Size of my Printer: 256x256mm

\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

TwinePendantLamp

FuzzyPendant.stl

**_This design was made with you in mind :)_**
 
These checkered picture frames are some of my favorite designs! They print with minimal supports and use magnets to uniquely secure the pictures in place. The model was printed on my Bambu Lab P1S using the AMS. Check out the material and print details below! 
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**
**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print all 3 built plates using an AMS with your two favorite colors, press 6x3mm magnets into the 8 slots (might need a touch of super glue), and then assemble the frame with your favorite photos! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Bambu Lab PLA Matte (Ivory White) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
Bambu Lab Matte PLA (Latte Brown) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
3x6mm magnets — https://amzn.to/3zVhvwj
Gorilla Super Glue : https://amzn.to/3YJHT6m 

**Print settings**
Material — PLA
Print orientation — as shown in slicer images on this post! 
Nozzle size: 0.4 mm
Layer Height: 0.16 mm 
Bed Size of my Printer: 256x256mm
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

CheckeredPictureFrames

CheckeredPictureFrames.3mf

**_This design was made with you in mind :)_**

This organic mesh dome light is a modern and minimal way to light up any room! The model prints completely without supports and requires no special settings. These organic models will surely catch the eyes of anyone visiting your living space (especially with the cool pattern it creates on the walls)!
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**

**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the model without supports, screw a corded light bulb socket into the model, screw in any standard light bulb, and turn it on for all to see! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Hanging Light Cord Kit — https://amzn.to/4cV5dSe
Bambu Lab PLA Matte Ivory White — https://us.store.bambulab.com/collections/bambu-lab-3d-printer-filament/products/pla-matte-filament?variant=40489681780872

**Print settings**
Material — PLA
Print orientation — prints opposite of how it hangs! 
Nozzle size: 0.4 mm
Layer Height: 0.2 mm Standard
Infill: 15%
Bed Size of my Printer: 256x256mm

Note: The model does not print perfect due to the large overhangs, but nothing that can’t be touched up with a deburring tool!
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

OrganicDomeLamp

OrganicGlobeLamp.stl

**_This design was made with you in mind :)_**

This rattan computer docking station can be used to store any two laptops, tablets, or a combo of the two! I use it to store my wife's MacBook and iPad! The model was design to be fully 3D printable WITHOUT ANY SUPPORTS! The rattan “fabric” section was printed in a vertical orientation with a brim, while the main frame pieces were printed in a flat orientation. 
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) and download the .stl and the preconfigured .3mf Bambu Studio File by selecting “Download All > Original”**

ATTENTION: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my *Entrepreneur* membership tier! Downloading to sell is STRICTLY PROHIBITED IN OTHER TIERS. 
\
**Model Assembly**
Pretty simple for this one — print the model without supports, use a touch of super glue to bond the rattan arch to the inlay on the main frame, snap together the other pieces (CAREFULLY), and load your devices!  
**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)!**
\
**Materials** 
Bambu Lab PLA Matte (Ivory White) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
Bambu Lab Matte PLA (Latte Brown) — [https://us.store.bambulab.com/](http://shrsl.com/2n5nn-2yn7-1cwx9)
Gorilla Super Glue — https://amzn.to/3YJHT6m
\
**Print settings**
Material — PLA
Print orientation — shown in images!
Nozzle size: 0.4 mm
Layer Height: 0.2 mm Standard (rattan), 0.24 mm or 0.28mm for tan structure 
Infill: 60-100%
Bed Size of my Printer: 256mm x 256mm
\
P.S. The links in this description may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

ComputerDock

computer_stand_rattan.stl

Full Freedom to **UNLIMITED** downloads!

For **personal &amp; commercial use!** Includes a **commercial license** to sell the things you print! (the files themselves cannot be sold or shared)

**Select Annual billing for 25% off :)**

Entrepreneur

Full Freedom to **UNLIMITED** downloads!
 
For **personal printing only**; and does not include a commercial license to sell the things you print or the files you get! 

**Select Annual billing for 25% off :)**

Unlimited Personal

Print up to **7 models** on our page every month! 

This plan is for **personal printing only** and does not include a commercial license to sell the things you print or the files you get! 

**Select Annual billing for 25% off :)**

Personal

**_This design was made with you in mind :)_**

This rattan napkin holder is a fun little build that is perfect for turning your napkins into a decoration! The model prints completely without supports and can be assembled kind of like a lego kit!  
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**
**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the different colors on individual plates (can have multiple parts of same color), super glue the rattan arches in place, carefully snap the double-sided clips into place, and load your napkins! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Polymaker Matte PLA (Beige) — https://amzn.to/3yHIkDL
eSun PLA (Light Khaki) — https://amzn.to/46Qu0Fw
Gorilla Super Glue — https://amzn.to/3YJHT6m 

**Print settings**
Material — PLA
Print orientation — as shown in slicer images on this post! 
Nozzle size: 0.4 mm
Layer Height: 0.12 mm 
Infill: 15%
Bed Size of my Printer: 256x256mm
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

RattanNapkinHolder

rattan_napkin_holder.3mf

napkin_clip_final.stl

napkin_mainbody_final.stl

napkin_rattan_final.stl

**_This design was made with you in mind :)_**

This wavy-wave polaroid stand is perfect for displaying your favorite memories stored in the form of pictures! This model can stand on its own, or be hung on the wall. It holds 3 Polaroid pictures in total! 
\
**[Become a member](https://thangs.com/designer/mcinventiveproductions) to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original”**

**Note:** If you are interested in a **commercial license** to sell prints of my designs, you must obtain the license by signing up for my **_Entrepreneur_** membership tier!

**Model Assembly**
Pretty simple for this one — print the model, load your favorite Polaroid pictures, and display them for all to see! This model can be stand-alone or can be mounted on the wall using nails/screws/command strips, etc! 

**Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)**

**Materials**
Polymaker Matte PLA (Beige) — https://amzn.to/3yHIkDL

**Print settings**
Material — PLA
Print orientation — prints as shown in the Bambu Studio images! Nozzle size: 0.4 mm
Layer Height: 0.2 mm 
Infill: 15%
Bed Size of my Printer: 256x256mm
\
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

WavyPolaroidStand

WavyArchPolaroidStand.stl

WavyArchPolaroidStand.3mf

**_This design was made with you in mind :)_** 

Illuminate your space with this 3D printed A-frame cabin lamp, designed to bring the coziness of cabins into your living space. The model uses PLA filament in the colors of Matte Black & Matte Tan. The windows are printed using Bambu Lab Transluscent PETG. 

**[Become a member](https://thangs.com/designer/mcinventiveproductions) and get the .stl and the preconfigured .3mf Bambu Studio File by selecting “Download All > Original”**
Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my *_Entrepreneur_* membership tier!

**Model Assembly**
(1) Print all parts individually or group them together by color on your printer! 
(2) Layout all printed parts 
(3) **Watch the associated reel showing the assembly on my instagram page [@mcinventiveproductions](https://www.instagram.com/mcinventiveproductions/)!** 
(4) Assemble the A-Frame Cabin Lamp using super glue (be cautious of super glue touching your skin as it is an irritant!) 

**Materials**
PolyMaker PLA Pro (Black) : https://amzn.to/4fPP1oa
Bambu Lab Matte Tan : https://us.store.bambulab.com
Bambu Lab Transluscent PETG : https://us.store.bambulab.com
Gorilla Super Glue : https://amzn.to/3YJHT6m 
Bambu Lab LED Lamp Kit : https://us.store.bambulab.com

**Print settings**
Material — PLA
Print orientation — shown in images!
Nozzle size: 0.4 mm
Layer Height: 0.2 mm Standard
Infill: 15%
Bed Size of my Printer: 256x256mm
\
P.S. The links in this description may be affiliate links which allow me to benefit financially from your purchase at **no extra cost to you!**

A-FrameCabinLamp

AFrame_Lamp_Final.3mf

cabin_roof_final.stl

cabin_main_base.stl

cabin_small_back_window.stl

cabin_large_back_window.stl

cabin_door_glass.stl

cabin_large_back_window_frame.stl

cabin_door_frame.stl

cabin_front_framing.stl

cabin_deck(optional).stl

cabin_front_glass.stl

cabin_small_back_window_frame.stl

Modeling 3D printable home decor & practical household items that push the limits of 3D printing technology! 


Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

mcinventiveproductions

Achievements

Seedling

Explorer

Fan Favorite

Pinned models