MinimalistClock

This design was made with you in mind :)

This minimal clock is one of the most professional looking and satisfying prints I have ever printed! As I type this I am watching the seconds hand spin around and its pretty satisfying. The model was printed on my Bambu Lab P1S. Check out the material and print details below!
Become a member to get the STL files and configured .3mf Bambu Studio File by selecting “Download All > Original” Note: If you are interested in a commercial license to sell prints of my designs, you must obtain the license by signing up for my Entrepreneur membership tier!

Model Assembly Pretty simple for this one — print all the parts, remove the supports from the main clock, load the clock kit in by tightening the gold nut, super glue the outer most clock kit seconds hand to the 3D printed one, and load the 3 hands on the clock kit! Then either hang it on the wall or screw in the two legs to display it on your table!

Watch the associated reel showing the assembly on my instagram page @mcinventiveproductions

Materials Bambu Lab PLA Matte (Ivory White) — https://us.store.bambulab.com/ Bambu Lab Matte PLA (Dark Brown) — https://us.store.bambulab.com/ Bambu Lab Clock Kit — https://us.store.bambulab.com Gorilla Super Glue — https://amzn.to/3YJHT6m

Print settings Material — PLA Print orientation — as shown in slicer images on this post! Nozzle size: 0.4 mm Layer Height: 0.28 mm, 0.12 mm Bed Size of my Printer: 256x256mm
P.S. The links above may be affiliate links which allow me to benefit financially from your purchase at no extra cost to you!