This Multibin Top stores a multimeter and associated wires. The recommended shell height is 1 cell.

Multibin Tops click onto Multibin Inserts or can be attached to Shells using Top Click Rims.

Printing Guidelines:

Use 3 perimeter wall thickness, 0.2 mm layer height, 15% infill, and no supports. Apart from that, use your printer's default settings.

The printing orientation is as provided in the file. Make sure the downloaded files are .STL. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.

For more information about printer settings, click here.