tracking pixel
MYTHODX

Christmas Bauble lithophane top

by
matty.nurseus
Follow
Follow
Remix Model
matty.nurseus
matty.nurseus
|
Image 3 of 6
Christmas Bauble lithophane top 3d model
matty.nurseus
matty.nurseus
|
Image 3 of 6
Christmas Bauble lithophane top 3d model
2D
3D
Makes
Christmas Bauble lithophane top 3d model
Christmas Bauble lithophane top 3d model
Christmas Bauble lithophane top 3d model
Christmas Bauble lithophane top 3d model
Christmas Bauble lithophane top 3d model
Christmas Bauble lithophane top 3d model

~This top is part of a Christmas lithopane that can be created in itslitho.com. Its litho settings can be found in the images to produce an amazing lithophane bauble. I used a 1w led cob light that can be found on aliexpress https://www.aliexpress.com/item/1005002310393752.html?spm=a2g0o.productlist.0.0.3ddb4e7aVt2YLo&algo_pvid=2ab40fed-d9da-4ed7-bfb2-c1984084c6f1&aem_p4p_detail=202111171056113236449001211850006390721&algo_exp_id=2ab40fed-d9da-4ed7-bfb2-c1984084c6f1-0&pdp_ext_f=%7B%22sku_id%22%3A%2212000020027152347%22%7D

and a double AAA battery pack https://www.aliexpress.com/item/1005001482039265.html?spm=a2g0o.search0302.0.0.2a25781389siDK&algo_pvid=8d15e901-6a2c-4b08-8557-dcd88159ff7b&algo_exp_id=8d15e901-6a2c-4b08-8557-dcd88159ff7b-19~

The wire I used was just speaker wire.

Be sure when printing the litho its on a Raft and drop it a few layers to ensure good adhesion as the model that itslitho creates has a slight bezel round the rim. the second part is the battery clip which will work fine for the model linked above

I will share more photos soon


4 Likes7 DownloadsNovember 17, 2021


4 Likes7 DownloadsNovember 17, 2021