3D MODEL DESCRIPTION
If you use this component in your Glock, you can fire more quickly and precise.
I created two different component for two position, see the pictures.
IMPORTANT:
This parts are for you that use the LEFT hand for shoot.
I printed this for Glock gen 3, but you can mount this parts for others model.
The screws are two M4x35mm with nuts.

3D PRINTING SETTINGS
You can use ASA or other materials, I print this component with 80 or more infill. Don't need suppor.

SPEED LEDGE, POGGIADITO, SPEED FIRE LEFT HAND FIRE

Speed ledge-SX.stl

3D MODEL DESCRIPTION
If you use this component in your Glock, you can fire more quickly and precise.
I created two different component for two position, see the pictures.
IMPORTANT:
This parts are for you that use the RIGHT hand for shoot.
I printed this for Glock gen 3, but you can mount this parts for others model.
The screws are two M4x35mm with nuts.

3D PRINTING SETTINGS
You can use ASA or other materials, I print this component with 80 or more infill. Don't need suppor.

SPEED LEDGE, POGGIADITO, SPEED FIRE RIGHT HAND FIRE

Speed ledge-DX.stl

This component is needed to mount a light or other accessories that use a picatinny rail on your Glock.
I use this on my Glock gen.3
Is necessary a screw M4x30 and a nut.
I suggest the material ASA or ABS.

For position of part you can see the photo.
Infill 80% or more
Brim
support grid 20%
Layer 0,2 with nozzle 0,4 mm

GLOCK GEN3 RAIL ADAPTERS FOR PICATINNY RAIL

RAIL ADAPTERS FOR picatinny rail.stl

3D MODEL DESCRIPTION
The GLOCK plus magazine extension is compatible with 9, .40, .357 e 45 GAP caliber GLOCK models.
Adds 4 rounds on 9mm and .357 Sig magazines and 1 on .40S&W and 45 GAP.
fits Gen.3, Gen.4 and Gen.5

Total rounds for .40 are seventeen.
The original spring works correctly without changes.
I used Polycarbonate Polymax, and it's very hard and flexible.
The clip works very well to keep the mag in garments and it's go inside the Glock hole without difficulty.
For assembly are needed two screws UNI 5931 M3x8 mm
Important, print Clip like image, for the best result (hard and flexible)

3D PRINTING SETTINGS
Material ASA, ABS, PC or more Technic.
Infill 100% line.
For Clip, no supports needed.
For Insert, no supports needed.
For Extension, it depends on the material.

GLOCK PLUS 4 MAGAZINE EXTENSION AND INSERT WITH CLIP

Extension-clip-mag-plus-4.stl

3D MODEL DESCRIPTION
The GLOCK plus magazine extension is compatible with 9, .40, .357 e 45 GAP caliber GLOCK models.
Adds 2 rounds on 9mm and .357 Sig magazines and 1 on .40S&W and 45 GAP.
fits Gen.3, Gen.4 and Gen.5
For disassembly magazine:
https://www.printables.com/it/model/8351-glock-mag-tool-9-40

3D PRINTING SETTINGS
Material ASA, ABS or more Technic.
Infill 80% concentric.
No supports needed.

GLOCK PLUS 2 MAGAZINE EXTENSION AND INSERT

Glock magazine extension plus2.stl

3D MODEL DESCRIPTION
This parts fit on Glock 17 gen.3
This kit add to the pistol Three picatinny slide rails.

I suggested material ABS or ASA.
Use the tap to thread the holes, I don't use insert, and the screws work good.
For type of screws see the pictures.

3D PRINTING SETTINGS
Nozzle 0,4
Layer 0,2
Infill 80% or more
support grid 20% is not needed for side picatinny
with brimm.

KIT PICATINNY RAIL FOR GLOCK 17 GEN.3

G-17 adaptor for 3 picatinny rail.stl

3D MODEL DESCRIPTION
I mounted this parts on my Glock gen.3 35 SC.
This kit add to the pistol Three picatinny slide rails.
I studied this parts for Glock with a long barrel like model 35 ecc.
but I can studied this parts also for others model.
I suggested material ABS or ASA.
Use the tap to thread the holes, I don't use insert, and the screws work good.
For type of screws see the pictures.

3D PRINTING SETTINGS
Nozzle 0,4
Layer 0,2
Infill 80% or more
support grid 20% is not needed for side picatinny
with brimm.

KIT PICATINNY RAIL FOR GLOCK GEN 3

Block Picatinny rail for glock gen 3.stl

Unlock your outdoor hobbies with our 3D model of a Gen 3 Glock Vertical Grip. 
This 3D model, categorized under "Hobbies/Outdoors", is expertly designed with lightweight yet overwhelmingly strong materials, promising extended durability. 

The grip is constructed using ASA material, known for its toughness and resistance to environmental damage. Installation is simple, requiring one M4 x 30 mm screw and nut.

The 3D Grip model fits seamlessly with Gen 3 Glock, enhancing control and reliability during use. The designer, identified on Thangs.com as marcoK625, offers an option to print the component using ASA Black Extrudr Dura Pro material. For all the details about this design, visit the user's page on our site.

For 3D printing, suggested settings:3D PRINTING SETTINGS
Material Extrudr DuraPro ASA or other.
Support Yes, grid with 20% infill
With Brim
Infill 60% zig zag
Layer height 0,2
Wall line count 3
Top e bottom layer 4

Grab this 3D model from Thangs.com and enrich your outdoor hobby experience with state-of-the-art additions to your gear. Remember to review the images for a comprehensive understanding of the model's specifics and aesthetics.

VERTICAL FOREGRIP FOR GEN 3 GLOCK

hand grip glock gen 3-ver.2.stl

3D MODEL DESCRIPTION
Nato Rail - Picatinny Angled Mag Holder Foregrip For Glock gen 3
I use ASA material for realize it.
For fix it are necessary two screws M4 x 30 mm and nuts M4.

I can print for you this component, material ASA Black Extrudr Dura Pro.
Contact me for details.

3D PRINTING SETTINGS
Material Extrudr DuraPro ASA or other.
Support Yes, grid with 20% infill
With Brim
Infill 60% or more zig zag
Layer height 0,2
Wall line count 3 or more
Top e bottom layer 4 ore more

Nato Rail - Picatinny Angled Mag Holder Foregrip For Glock gen.3 ONLY 3D PRINTING FILE

Angled mag holder picatinny nato rail for glock gen.3.stl

3D MODEL DESCRIPTION
Angled Mag Holder Foregrip GEN 3 GLOCK.
I use ASA material for realize it.
For fix it are necessary one screw M4 x 30 mm and nut M4.

I can print for you this component, material ASA Black Extrudr Dura Pro.
Contact me for details.

3D PRINTING SETTINGS
Material Extrudr DuraPro ASA or other.
Support Yes, grid with 20% infill
With Brim
Infill 60% zig zag
Layer height 0,2
Wall line count 3
Top e bottom layer 4

ANGLED MAG HOLDER FOREGRIP FOR GLOCK GEN 3

ANGLED MAG HOLDER FOREGRIP FOR GLOCK GEN 3 REV.1.stl

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5150319.

This is a baby puzzle game.
If you like my work please consider sending me a tip, buy me a coffee!
Thanks!!
[paypal.me/DeborahMarchetti](https://www.paypal.com/paypalme/DeborahMarchetti).

Baby puzzle game

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5159745.

This is a hook for the Christmas ball, because the hook original are very weak.


Hook for Christmas ball

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5042519.

This is for reduce the space for the filament hole.

Qidi X-Plus reducer inner filament hole

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5196030.

This is support for inner tube 8 mm of Qidi X-Plus printer.

Support PTFE inner tube 8 mm Qidi X-Plus

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5196044.

I added this pulley for reduce the resistance of spool.
I used two bearings dimension D.19 d.10 x 5mm.

Support PTFE inner tube with pulley Qidi X-Plus

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5196023.

This is supporto for inner tube of Qidi X-Plus printer. This part is for 6 mm tube (external diameter)

Support PTFE inner tube 6 mm Qidi X-plus 

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5025810.

Pulley for improve the direction of filament with spool is inside.
Bearing De=32mm Di=12mm thickness = 10mm

Pulley 50mm for 1,75mm filament Qidi X-Plus

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

marcok625

Achievements

Seedling

SPEED LEDGE, POGGIADITO, SPEED FIRE LEFT HAND FIRE

SPEED LEDGE, POGGIADITO, SPEED FIRE RIGHT HAND FIRE

GLOCK GEN3 RAIL ADAPTERS FOR PICATINNY RAIL

GLOCK PLUS 4 MAGAZINE EXTENSION AND INSERT WITH CLIP

GLOCK PLUS 2 MAGAZINE EXTENSION AND INSERT

KIT PICATINNY RAIL FOR GLOCK 17 GEN.3

KIT PICATINNY RAIL FOR GLOCK GEN 3

VERTICAL FOREGRIP FOR GEN 3 GLOCK

Nato Rail - Picatinny Angled Mag Holder Foregrip For Glock gen.3 ONLY 3D PRINTING FILE

ANGLED MAG HOLDER FOREGRIP FOR GLOCK GEN 3

Baby puzzle game

Hook for Christmas ball

Qidi X-Plus reducer inner filament hole

Support PTFE inner tube 8 mm Qidi X-Plus

Support PTFE inner tube with pulley Qidi X-Plus

Support PTFE inner tube 6 mm Qidi X-plus

Pulley 50mm for 1,75mm filament Qidi X-Plus

Pulley 50mm for 1,75mm filament Qidi X-Plus

Qidi X-Plus reducer inner filament hole