Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5877307.

My frist contribution.

I needed some type of machine to rewind some spools that the fillament was overlapoing.
Saw some ideas her in Thingiverse and decided to make one more easier to mount hte spool, and using less material.

When you use it you need to fix it to the table.

If the SpoolEnds dont screw well in the rod's, try heating them up a litle with a air gun.

Material list:
*2 M8 rods
*4 rollers dia8x22x7
*roller dia5
*+- 18 M8 nuts
*11 screw rings M8

Share some makes

3Dmaps Spool Winder

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5973402.

This was one of my first print's.
This is very handy to have all the tools and area around the Printer clean.

This is for the Ender 3 but it might fit in others models.

Ender 3 Tool Box

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5991471.

I already had used in this past (1 or 2 months ago) a Z axis stabilizer for the rod but it seemed that it was bending so i take it off immediately.

After seeing several models i couldn't find something that i thought it would be secure to use without bending the screw rod.

Than i had the idea: "Why not make a TPU/Flex ring for the bearing to guide the screw rod and let it move with the compensation of the flexibility of the ring?!?!?"

And that's how this thing born! Also added a nut to freely move the Z Axis that is a copy of the bed knuts of the ender 3 but modified for this function.

You will need a bearing dia8*dia22*7.

INFILL of the TPU i did it with 20% in gyroid pattern and it works well (so far).

ATTENTION!!!
I have a Ender 3 clone from LEON3D. In this model i found the best center of the screws for my printer.
Find out if you need to change them before printing.
If some one find out the center for the ENDER 3 i might changed and release the file updated

Another Z-Axis Stabilizer with TPU ring

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5936909.

Balls for the purifier, or ponds in which symbiotic bacteria settle,
that purify the water.

This is a quick 3d model remixed.
I still haven't printed this. I made this to be self assembly and trying to avoid the usage of glue.

The more pieces you place in the filtration or tank, the better.

3Dmaps Pond Bio Ball

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5973429.

When i bought the Ender 3 i also bought a glass bed from creality to print PLA.
Recently i started to print with PETG. And the original bed is better for PTEG.
But without autoLeveling is very difficult to change the bed's between materials.

So i found a design to adjust the Z EndStop and add spacer ability to quick change the bed's.

Tip: Print the spacer's in different colors for quick identify them.

You will need:
*3x M4x45 (1x for knob and 2x for the original feet to fix the base)
*1x Medium strength spring

I used the EndStopCover from here: https://www.thingiverse.com/thing:4564836

Ender 3 Rapid Z Adjust

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5973413.

This is a filament guide that is easily snap on on the back of the back of the Motor Y.

You will need a roller dia.8xdiam22x7 and one M3 screw.

Ender 3 Moter Y Filament Guide

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5938652.

This is just a Remix to make the Belt Tensioner Knob equals to my Control Knob.
One version Is a open nut and anoter a closed knob.

Nothing more was changed.

And you will need 2 - 5x25 mm Hexagon Head Screw and Nut

ENDER 3 Belt tensioner Knob Remix

Model originally uploaded to Thingiverse at https://www.thingiverse.com/thing:5973436.

Yet Another Control Knob for the Creality Ender 3 / Ender 3 Pro / Cr-10

I wanted a pretty knob for the display for my Ender3 but with a easy way to use it, so i had a ring to it to more quickly change values in the printer.

Yet anoter maps Display Knob Ring for Creality Ender 3 / Ender 3 Pro / Cr-10

Just a plastic mood designer exploring 3D printing.


Buy me a coffee at :
coindrop.to/maps3d

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

maps

Achievements

Trailblazer

Seedling