tracking pixel
luciano e

Customizable Christmas Stocking.3mf

by
luchosstore
Follow
Follow
Remix Model
luchosstore
luchosstore
|
Image 1 of 6
Customizable Christmas Stocking.3mf 3d model
luchosstore
luchosstore
|
Image 1 of 6
Customizable Christmas Stocking.3mf 3d model
2D
3D
Makes
Customizable Christmas Stocking.3mf 3d model
Customizable Christmas Stocking.3mf 3d model
Customizable Christmas Stocking.3mf 3d model
Customizable Christmas Stocking.3mf 3d model
Customizable Christmas Stocking.3mf 3d model
Customizable Christmas Stocking.3mf 3d model

Christmas is around the corner!

I design this set of stocking to be customize with any name and few extras slots for Christmas emojis.

Perfect to hang in the tree or can be sit on a flat surface to display.

Files:

  1. Flat stocking 6 : This model have one side flat for easy print with slot for 6 different letters or emojis.

2._Flat stocking 13:_One side is flat to print horizontal with 13 slots all around to add as many letters or Christmas emojis.

3.Stocking 6 : This is the same 6 slot stocking but without flat side ( Increases printing time and needs more support but you have a full stocking).

4.Letters: This file contains the letters, emojis and a blank square to print for the slots.

Reccomendation and instructions:

I save changing color material by cutting the stocking ( white and red part) and adding a stop in layer 11 ( for the letters) to replace color.

The flat versions needs a small amount of support for the hook and the other stocking file uses more supports due is best to print vertical oriented.

The tolerance of the slots and the base of the letters has been carefully calibrated to .3, ensuring a snug fit and leaving no gaps. The use of glue is advised to secure them.

Have a Merry Christmas!


0 Likes0 DownloadsNovember 14, 2024


0 Likes0 DownloadsNovember 14, 2024

Instructions

Filament • 0.2mm

MaterialPLA
Layer height0.2 mm
Infill density5 %
SupportsTree
BrimNo
MulticolorFilament Swap