A miniature-sized version of a medieval town.

Dimemsions:
19.7cm x 19.7cm x 1cm

Other materials:
1. Strong glue (I used Tamiya Cement)
2. Acrylic paints

Further instructions:
Print all parts at low layer heights (I used 0.08mm)
Print at low speeds'
Use retractions

Medieval City Diorama

wall v1.stl

A phone and large tablet stand.
Some improvements over the last model:
- Optimized to use less filament
- More accessible screen usage especially for the bottom part of the screen
- Foldable supporting stands to reduce space

The print is print in place so supports aren't needed.

Modern phone / tablet stand v2

Phone stand v2.stl

A simple pen holder.

Fits most pens including long ones.

Printed mine at 15% infill however it was still a little unstable so I recommend printing at slightly higher infill.

Simple Pen Holder

Pen holder.stl

A DIY Powerbank that holds 4 18650 lithium ion cells.

Other Materials Required:
- 4 18650 lithium ion batteries 
- 22.5 W Powerbank module ( ref link: https://my.shp.ee/8Wy2J2U)
- 3 M2.5 x 12 screws (to mount the powerbank cover)
- 2 M2.5 x 6 screws (to mount the powerbank module)
- 1 M2.5 x 4 screw (for decoration)
- Some solid transparent sheets
- Superglue

Precautions:
- Ensure that all solder/welding connections are secure 
- Check that all batteries used are of similar brand and capacity
- Ensure the batteries have at least a 5A drain capacity

Installation:
1.  Print all files. (Carbon black PLA was used for the body and cover white white ABS was used for the extended (decoration) file.

2. Spot weld/ solder 4 18650 batteries in parallel. Ensure all batteries have the same voltage/ capacity before making the connections.

3. Solder wires from the battery pack to the powerbank module. Ensure everything works before putting it in the casing.

4. Secure the powerbank module to the casing using screws. Install the cover. 

5. Superglue a transparent piece of plastic film, decoration pieces and the button (included in the cover file).




22.5 W DIY Powerbank

22.5 W Powerbank Body.stl

Link to V2: 
https://thangs.com/designer/lucaswql8699/3d-model/Modern%20phone%20%2F%20tablet%20stand%20v2-1134918

A simple phone stand I made for 3d printed use.
Can fit most phones/ tablets/ small laptops

Dimensions:
13.2cm x 7.9cm x 16cm

Modern Phone/Tablet Stand

Phone stand_.stl

A simple magnetic wireless phone charger that acts as a stand.

Fits most 59mm diameter wireless chargers 
(Mine is the wireless charger model from Charby)

Additional items:
1. Very strong double sided tape (To tape the wireless charger)

Magnetic Wireless Phone Stand (59mm)

Phone holder v4 v2.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

lucaswql8699

Achievements

Seedling