I had a Hypercube. And then I didn't want a Hypercube anymore so now it's a Voron inspired project. Basically I'm just copying Voron parts onto a 3030 frame.

Frame and linear rails measurements are in BOM section

BOM (incomplete)
m5 45mm x16
m5 50mm x2
m5 10mm x8
m5 16mm x20
m3 50mm x2
m3 16mm x8

m3 heatset insert x4

m3 nut x8

Frame (for 300x300 print area):
3030 485mm x 7
3030 520mm x 8
3030 700mm x 4
2020 260mm x 2
2020 515mm x 2
2020 460mm x 1

MGN12H 370mm x 3 (this is just what I have laying around)
If your Y rails are more than 103mm longer than your Y extrusions use non-FB versions of the top idler and motor mount

Smooth gt2 6mm wide idler pulley x10
20 teeth gt2 6mm wide idler pulley x2

Idlers bore are 5mm

I have not tested this and have no idea how well it works so if you decide to try it, do it at your own risk.

UPDATE: 30/03/2022

Flipped the gantry upside down so that I could reuse the bed from the Hevo with the added 12mm rod mount, changed endstop setup

UPDATE: 27/02/2022

added microswitch endstops for X and Y

Github repo:
https://github.com/PoopyPops/Hevoron

Hevoron

A_Motor_Bottom.stl

12mm_Rod_Mount_A_x2.stl

Right_Idler_Top_FB.stl

Left_Idler_Top_FB.stl

A_Motor_Top_FB.stl

B_Motor_Top_FB.stl

Right_Idler_Bottom.stl

B_Motor_Top.stl

B_Motor_Bottom.stl

endstop pod.stl

Left_Idler_Adjuster.stl

Left_Idler_Bottom.stl

Left_Idler_Top.stl

Right_Idler_Adjuster.stl

Right_Idler_Top.stl

A_Motor_Top.stl

Left_Gantry_Bottom.stl

Left_Gantry_Top.stl

Right_Gantry_Top.stl

Right_Gantry_Bottom.stl

Activity related to collaborating with others on models

Likes, comments, and activity from your community

A roundup of models that we think you'll like

For when we think someone might have posted your content as their own

New content from your premium memberships

Emails and messages from designers you follow

ltdat1199

Achievements

Seedling

Hevoron