This is a shoulder bag hanger that can accommodate a number of bags but also is linkable to a chain of hangers so you can hold several bags vertically in a closet or on a hook. The radius of the bag holder approximates a human shoulder so that the strap is kept in its natural shape.

100% printed - no hardware, fasteners, or adhesives required. No additional support is required.

Print Settings:

Material = PLA, any material should work.
Nozzle = 0.4mm Layer height = 0.2mm Line width = 0.4mm Wall count = 4 (1.6mm) Top and Bottom Layer Count = 5 Infill = minimum 40% Cubic Ironing = Not required Brim = No Support = No

See my blog for more details and other product info… https://www.logicalplanet.com/